YTT-150差動遠傳壓力表YTT-150
ytt-150型差動遠傳壓力表既可對所測壓力作現場指示又能轉換為0～10ma·dc或4～20ma·dc，標準電流信號輸出？梢耘cⅱ型或ⅲ型電動單元組合儀表中的二次儀表、調節器、計算單元及巡回檢測裝置組成自動記錄、調節、控制等系統。此儀表可與隔離器（隔膜體）連接。制成yttp差動遠傳隔膜壓力表。 ytt pressure gauge with differential transformer is not only able to indicate the pressure value measured, but also transform it into 0～10ma·dc or 4～20ma·dc, the standard current output signals. combined with the secondary metter, regulator, calculating unit ａnd cyclic detector, the gauges can be formed to be an system with automatic record, regulation ａnd control.主要技術指標 technical specifications精度等級 accuracy: 1.5測量范圍 ranges（mpa）: 0～0.1至60、-0.1～0、-0.1～0.06至2.4輸出信號 output signal:（1）0～10ma·dc（2）4～20ma·dc表殼 case:08f（噴黑塑）機芯 movement: 銅合金 copper alloy接頭 socket: 銅合金 copper alloy電源電壓 voltage: 220v，50hz or 24vdc消耗功率 power consumption:≤3w負載電阻 load resistance: 0～1.5kω（0～10ma）, 0～350kω（4～20ma）工作條件 working conditionos:環境及工作介質溫度應不超過-20～60℃,相對濕度≤85%，且震動和被測介質的急劇脈動應對儀表正常工作無明顯影響。 ambient temperature ａnd temperature of medium must within the rage:-20～60℃. relative humidity: ≤85%. please make sure that there is no any obvious reactiono on the proper operation of the gauge when vibration ａnd sharp pulsation of the measured media are exist.工作壓力 working pressure:靜負荷用至測量上限值的3/4，交變負荷用至測量上限值的2/3，短時壓力用至測量上限值。 steady:3/4 of the full scale value, fluctuation:2/3 of the full scale value. short time: full scale value.
| 型號名稱 desc-ription | 連接方式及尺寸 connections | 適用范圍 applicaion |
| ytz-150 差動遠傳壓力表 pressure gauge with differential transformer | 螺紋連接m20×1.5 或約定的特殊要求 screw connection m20×1.5 or customized connectin | 適于測量對銅合金、鐵無腐蝕作用的氣體及液體的壓力。 suitable for the gaseous or liquid media that will not corrode the copper alloy ａnd iron. |
| ytzp-150 差動遠傳壓力表 diaphragm pressure gauge with differential transformer | 適于測量腐蝕性較強的氣體及液體的壓力。 suitable for measuring the corrosive gas or liquid. | |
| ytzp-150f 差動遠傳法蘭隔膜壓力表 flanged diaphragm pressure gauge with differential transformer | 法蘭連接 （詳見隔膜表說明書） 約定標準、尺寸 flange connection（see information on diaphragm gauges） or customized standard ａnd size. | 適于測量腐蝕性較強，且粘稠或易結晶的介質的壓力。 suitable for visous, strong corrosive or easy to be crystallized media. |
| 接線示意圖 | 儀表外形尺寸 |
 |  |
YTT-150電阻遠傳壓力表YTT-150
ytt-150型差動遠傳壓力表既可對所測壓力作現場指示又能轉換為0～10ma·dc或4～20ma·dc，標準電流信號輸出？梢耘cⅱ型或ⅲ型電動單元組合儀表中的二次儀表、調節器、計算單元及巡回檢測裝置組成自動記錄、調節、控制等系統。此儀表可與隔離器（隔膜體）連接。制成yttp差動遠傳隔膜壓力表！ tt pressure gauge with differential transformer is not only able to indicate the pressure value measured, but also transform it into 0～10ma·dc or 4～20ma·dc, the standard current output signals. combined with the secondary metter, regulator, calculating unit ａnd cyclic detector, the gauges can be formed to be an system with automatic record, regulation ａnd control.主要技術指標 technical specifications精度等級 accuracy: 1.5測量范圍 ranges（mpa）: 0～0.1至60、-0.1～0、-0.1～0.06至2.4輸出信號 output signal:（1）0～10ma·dc（2）4～20ma·dc表殼 case:08f（噴黑塑）機芯 movement: 銅合金 copper alloy接頭 socket: 銅合金 copper alloy電源電壓 voltage: 220v，50hz or 24vdc消耗功率 power consumption:≤3w負載電阻 load resistance: 0～1.5kω（0～10ma）, 0～350kω（4～20ma）工作條件 working conditionos:環境及工作介質溫度應不超過-20～60℃,相對濕度≤85%，且震動和被測介質的急劇脈動應對儀表正常工作無明顯影響。 ambient temperature ａnd temperature of medium must within the rage:-20～60℃. relative humidity: ≤85%. please make sure that there is no any obvious reactiono on the proper operation of the gauge when vibration ａnd sharp pulsation of the measured media are exist.工作壓力 working pressure:靜負荷用至測量上限值的3/4，交變負荷用至測量上限值的2/3，短時壓力用至測量上限值。 steady:3/4 of the full scale value, fluctuation:2/3 of the full scale value. short time: full scale value.
| 型號名稱 desc-ription | 連接方式及尺寸 connections | 適用范圍 applicaion |
| ytz-150 差動遠傳壓力表 pressure gauge with differential transformer | 螺紋連接m20×1.5 或約定的特殊要求 screw connection m20×1.5 or customized connectin | 適于測量對銅合金、鐵無腐蝕作用的氣體及液體的壓力。 suitable for the gaseous or liquid media that will not corrode the copper alloy ａnd iron. |
| ytzp-150 差動遠傳壓力表 diaphragm pressure gauge with differential transformer | 適于測量腐蝕性較強的氣體及液體的壓力。 suitable for measuring the corrosive gas or liquid. | |
| ytzp-150f 差動遠傳法蘭隔膜壓力表 flanged diaphragm pressure gauge with differential transformer | 法蘭連接 （詳見隔膜表說明書） 約定標準、尺寸 flange connection（see information on diaphragm gauges） or customized standard ａnd size. | 適于測量腐蝕性較強，且粘稠或易結晶的介質的壓力。 suitable for visous, strong corrosive or easy to be crystallized media. |
| 接線示意圖 | 儀表外形尺寸 |
| | |
不銹鋼耐震差動遠傳壓力表YTT-150AB
YTT-100-150 YTT-150AB不銹鋼差動遠傳壓力表YTT-100-150-Z YTT-150AB-Z不銹鋼耐震差動遠傳壓力表
不銹鋼差動遠傳壓力表適用于一般環境，測量對不銹鋼無腐蝕性氣體、液體和蒸汽的壓力。儀表除就地指示壓力值外，還能連續輸出與壓力值成線性的0-10mA或4-20mA直流信號，可與DDZ-II或DDZ-III型變送單元組合儀表配合應用，組成顯示、記錄、調節、控制等自動化系統。
耐震型差動遠傳壓力表還具有抗振動環境、耐脈動介質及沖擊載荷特性。
技術參數：
| 產品名稱及型號 | 輸出信號 與負載電阻 | 測量范圍 MPa | 精確度 % | |
| 差動遠 傳壓力表 | 耐震差動 遠傳壓力表 | |||
| YTT-100/150A | YTT-100/150A-Z | 0-10mADC ≤1KΩ | -0.1～0.3;-0.1～0.5; -0.1～0.9;-0.1～1.5 -0.1～2.4; 0～0.16;0～0.25;0～0.4;0～0.6; 0～1.0;0～1.6;0～2.5;0～4.0;0～6.0; 0～10;0～16;0～25;0～40;0～60 | ± 1.6 |
| YTT-100/150 | YTT-100/150-Z | 4-20mADC ≤250Ω | ||
YTT-150A、YTT-150A-Z型儀表供電電源：220V；50Hz。YTT-150、YTT-150-Z型供電電源:24VDC由配電器供電。儀表工作溫度：-25℃~55℃，相對濕度不超過80%。耐震型儀表工作環境振動頻率不大于25Hz，振幅不大于0.3mm。儀表執行標準：Q/320211 DGH03-2003
外形尺寸：
端子接線示意圖：
使用與訂貨須知：
工作環境無腐蝕性氣體訂貨請說明名稱、型號及測量范圍。
主要產品：一般壓力表；軸向壓力表：軸向帶邊壓力表：真空表：真空壓力表：耐震壓力表；全不銹鋼壓力表；耐震全不銹鋼壓力表；定位型壓力表；差動遠傳壓力表；耐震型差動遠傳壓力表；電感壓力變送器；全不銹鋼電感壓力變送器：隔膜壓力表；壓力繼電器；耐震電接點壓力表；全不銹鋼耐震電接點壓力表：光電耐震電接點壓力表；耐震光電信號電接點壓力表；膜片壓力表；耐震膜片壓力表；耐腐膜片壓力表；耐腐耐震膜片壓力表；不銹鋼膜盒壓力表；膜盒壓力表；雙金屬溫度計；電接點雙金屬溫度計：卡箍型雙金屬溫度計：抗振差壓表；保護繼電器；抗振電接點壓力表（大功率）；防爆感應接點壓力表；抗振感應接點壓力表；控制器；感應接點壓力表（帶開關放大器）； 抗振電接點壓力表（帶保護繼電器）；抗振磁敏電接點壓力表等系列儀表。
耐磨切斷熱電偶WRE430MQ耐磨切斷熱電偶、差動遠傳壓力表YTT
| 型 號 | 分度號 | 測溫范圍℃ | 保護管材料 | 熱響應時間 | 規 格 |
| WRP-430MQ WRR2-430MQ | S | 0-1300 | GH2140 | ＜180S | 450X300 500X350 550X400 600X450 650X500 750X600 950X750 1150X1000 |
| WRN-430MQ WRN2-430MQ | K | 0-1000 | GH3030 | ||
| 0-800 | 1Cr18Ni9Ti | ||||
| WRE-430MQ WRE2-430MQ | E | 0-600 | 1Cr18Ni9Ti | ||
| WRP-440MQ WRR2-440MQ | S | 0-1300 | GH2140 | ||
| WRN-440MQ WRN2-440MQ | K | 0-1000 | GH3030 | ||
| 0-800 | 1Cr18Ni9Ti | ||||
| WRE-440MQ WRE2-440MQ | E | 0-600 | 1Cr18Ni9Ti |
耐酸壓力表耐酸壓力表、差動遠傳壓力表YTT