<legend id="dnf07"></legend>
    • <tr id="dnf07"><dfn id="dnf07"></dfn></tr>

      <dl id="dnf07"><label id="dnf07"></label></dl>
    • SW-CJ-1FD超凈工作臺

      垂直流形,準閉合式玻璃風門,可有效防止外部氣流滲入,及操作異味對人體的刺激。采用可調節風量風級系統,保證工作風速始終處于理想狀態。超凈工作臺LED液晶控制面板控制。實驗區采用優質不銹鋼,為操作者提供便利。

       

      該公司產品分類: 全自動恒溫解凍儀血液容漿機 干燥機 天平衡量器 攪拌機 振蕩器 樣品處理設備 干燥箱/培養箱 QY-15TS 恒溫制冷設備 實驗室家具

      YCD-5040高壓開關操作電源

       

      儀器簡介
      本儀器采用最新技術IGBT高頻開關電源,輸出穩定可靠。輸出電壓、電流數字顯示。操作簡單、體積小、重量輕,是高壓開關測試的理想必備儀器。
      操作步驟:
      1            分閘輸出:分閘輸出接高壓開關的分閘線圈。
      2            合閘輸出:合閘輸出接高壓開關的合閘線圈。
      3            打開儀器電源開關。
      4            旋轉“電壓調節”旋鈕,直到所需電壓。
      5            按下測試按鍵。
      6            此時直流輸出插孔即有輸出(部分機型)。
      7            要合閘請按“合閘”按鈕、要分閘請按“分閘”按鈕。
      技術參數
      8            輸出電壓:30---260V
      9            輸出電流:10A
      工作電源:電源:AC220±10%,頻率50HZ;
      工作環境溫度:-10~40℃;
      相對濕度:〈80%。

      QXQ無刷變阻起動器報價、作用、行情

      無刷變阻起動器概

             無刷變阻起動器是一種克服了繞線式異步電動機裝有滑環、碳刷和復雜的起動裝置等缺點,而保留了繞線電機起動電流小,起動轉矩大等優點的起動設備。凡原來采用電阻起動器、電抗器、頻敏變阻器、液體變阻起動器、軟起動器起動的 JR、JZRYR、YZR 三相繞線轉子交流異步電動機 變速、裝有進相機的除外)均可選用“無刷變阻起動器”來更新?lián)Q代。

      產品優點

      無刷變阻起動器把傳統的、繁瑣的、多觸點元件組成的起動裝置去掉,采用無刷無環運行,操作簡單,安裝拆卸方便,可大大減少維修費用,其優點是:去掉滑環、碳刷、刷盒、刷盒支架、短路環及二次回路系統中的頻敏變阻器、交流接觸器、時間繼電器等元件,并可保持電機原有的運行特性。

      該公司產品分類: 軟啟動器 二手電機 電機維修 軟啟動柜 電機維修設備 啟動器

      落地鏜床工作臺河北精儀工量具

      落地鏜床工作臺河北精儀工量具。落地鏜床工作臺通常叫做,鏜床工作臺,鏜床平臺,鏜銑床工作臺、機床工作臺。機床工作臺是機床工作當中不可缺少的輔助工具,工作臺包括:落地鏜床工作臺,龍門刨床工作臺、龍門銑床工作臺、加工中心工作臺、銑床工作臺、鏜床工作臺、雕銑機工作臺、立車工作臺、龍門鏜銑床工作臺等。   落地鏜銑床工作臺是最常使用的機床工作臺之一,它包括落地鏜床工作臺,落地銑床工作臺等。   落地鏜床工作臺用途:主要用于機床加工工作平面的使用,工作臺上面有孔和T型槽,用來固定工件,和清理加工時產生的鐵屑。常用機床工作臺:落地鏜床工作臺、鏜銑床工作臺。   落地鏜床材質:高強度鑄鐵HT200-300 ,工作臺硬度為HB170-240 ,經過兩次人工處理,(人工退火600度-700度、自然時效2-3年)使用該產品的精度穩定,耐磨性能好。   落地鏜床工作臺精度:   A級精度;固定工作臺工作表面的平面度為1000mm長度內0.05mm,長度每增加1000mm平面誤差值增加0.02mm,最大誤差值為0.10mm.   B級精度: 固定工作臺工作表面的平面度為;1000mm長度內0.08mm, 長度每增加1000mm平面誤差值增加0.03mm, 最大誤差值為0.15mm.   落地鏜床工作臺規格:?jiǎn)挝唬海╩m)落地鏜床工作臺標準規格:p1:p2:p3 1400×3800×350 2000×4000×350  2000×3000×300 1500×3000×350 2000×5000×350 2000×8000×400 1400×3800×350 2000×5000×350 2500×6000×400  p1: 1120x3800x350mm 重量4.2噸 p 2: 1400x3800x350mm 重量5.8噸 p3: 2240x6000x350mm 重量21噸 泊頭市精儀工量具制造廠位于泊頭市經濟開發區,緊靠京滬高鐵、京滬鐵路、 西臨104國道、京滬高速公路,交通便利。公司占地面積8000平方米,建筑面積4500平方米。主要生產研發各種型號鑄鐵平板、劃線平板,檢驗平板,檢驗平臺,實驗平板,鑄鐵平臺,圓形平臺,鉗工平臺等量具產品為鐵路、電機、風力發電、航空、碼頭、冶金、化工 、電廠、電動工具、汽車、電瓶車、橡膠等行業提供可靠的產品。本公司官網:http://www.hbjylj.com

      該公司產品分類: 鑄鐵平板 鑄鐵平板平臺系列

      N9ATX便攜一體機 工業計算機 工控機 工業電腦 工作站

       

      FieldGo N9 ATX便攜一體機

       

       

       

       

       

      便攜式計算機工作站支持最新的英特爾®™和至強處理器核心ì714.1”1024*768液晶顯示器2 * 5.25“外部驅動器灣2*3.5“內部驅動器托架

      該公司產品分類: 雷電擴展塢 PCIE擴展塢 PCI擴展塢 便攜計算機

      SC9000中析SC9000 96 & 384 道手動移液工作站

      SC9000 96 & 384 道手動移液工作站

      一次完成 96 孔移液 提供 0.5~20μL 和 5~200 μL 兩個量程

       

      20 µL 和 200 µL SC9000 96快速、多功能的實驗室助手

      中析設計的 20 μL 和 200 μL SC9000 96 具有速度快、精確度高且易于使用等優點。在了解研究人員如何工作

      及高處理量移液如何適合實驗室的總體工作流程基礎上,SC9000 96 可提供出色的準確性和精確性,采用良好的

      人體工程學設計,并且?guī)缀鯚o(wú)需培訓。SC9000 96 提供兩個量程范圍:0.5~20 μL 及 5-200 μL,具有出色的

      準確性 和精確性。

      SC9000 96 與單道和多道移液器比較,可一次同時進行 96 孔移液,384 孔板移液僅需四次,因此避免了跳過或重

      復孔板加樣的風險。

       

      高度可再現性 — SC9000 96 的高通道間一致性提供高質量的分析數據。

      簡單 — 不同于自動或半自動移液站, SC9000 96 無需編程、培訓,并且無需用電!

      經過驗證 — 經絕大多數常見的生命科學應用驗證, SC9000 96 可大幅加速 ELISA 和qPCR 等實驗速度,

      而不會影響數據質量。

       

      可靠、經濟實惠 —中析生產的 SC9000 96 可大限度地提高質量和性能標準,對每個研究項目都物有所值。

       

      加快工作流程

       

      對于基于基因組學、蛋白質組學和細胞的工作而言,96 和 384 孔板可使研究人員在一個緊湊的樣式中設置多個

      樣品,從而顯著增強下游分析能力。盡管 96 和 384 孔板具有諸多優勢,但是操作起來卻很具挑戰性:

       

      單道和多道移液器價格不貴,但是在填充多道孔板時速度緩慢且操作枯燥,并且大地增加跳過或重復填充的風險。

       

      自動移液系統提供更高的處理量,但是通常需要用的空間、用電、操作培訓以及相當復雜的編程知識。

       

      SC9000 96 通過同時手動進行 96 孔填充簡化 96 和 384 孔板移液,從而解決這些問題。其結構緊湊,無需用

      電,并提供以下兩個量程:0.5~20 μL 和 5~200 μL。全自動SC9000 96 易于使用且?guī)缀鯚o(wú)需培訓。

       

       

      技術

      工作原理

      PCR 與 qPCR

      利用 中析 吸頭輕松地將 PCR/qPCR 試劑移液至 96 孔板中

      酶聯免疫吸附試驗

      在全部 96 孔中同時快速添加試劑并啟動 / 停止反應

      蛋白晶體學

      快速地將緩沖液分配至孔板用于懸滴法

      Luminex 分析

      將緩沖液、抗體和其他溶液持續地添加至 Luminex 板

      藥物化合物篩分

      將傳感器、生物分子和化合物快速、準確地添加至 96/384 孔板

      對樣品制備進行排序

      同時分配緩沖液、酶和核酸

      對樣品清潔排序

      通過 96 通道移液加速沉淀和純化

      標準酶分析

      將酶、緩沖液和基質準確、精確地移液至孔板

      細胞培養設置

      數內創建復制板

      細胞培養 siRNA 處理

      輕松、準確地將 siRNAs 移液至培養板

      細胞分析

      采用準確的試劑,通過對至多 96 個樣品移液分裂細胞

      以下示例闡述 SC9000 96 如何完善基于蛋白質、核酸及細胞的技術

      大限度地提高數據質量一次性完成 96 通道移液

      操作簡單直觀,類似于手動移液器,三步完成 96 孔微孔板的裝填,與多道移液器比較具有諸多優勢。SC9000 96 對 96 通道進行一次性移液,因此比 8 或 12 通道移液器更加快速,并可提高ELISA 等時效要求嚴格實驗的數據質量。例如,以下描述了關于 SC9000 96 如何提高基于酶的實驗的工作流程:

      完美同時的反應

      SC9000 96 可同時在所有孔板內啟動和停止反應,因而提高 ELISA 等對時效性要求 很高的實驗分析。同時進行 96 孔板移液可消除孔與孔間差異現象和對快速完成分析的需求。

      絕不再跳過或重復孔板移液

      利用單道或多道移液器處理 96 孔板時,可能會跳過孔板并重復移液。 SC9000 96 同時填充

      所有的 96 孔板,因此不可能跳過孔板或意外重復移液至同一孔板內。

      信任耗材的純度

      對 SC9000 96 耗材的完全惰性完全放心,絕不會對實驗室結果產生任何影響。中析吸頭和儲液槽已被證明不含 DNA、DNA 酶、RNA 酶、熱原質和 ATP。

      放心地處理苛刻的應用

      20 μL SC9000 96 的精確度為 0.5 μL。作為非常準確、精確的移液工作站,SC9000 96 可用于快速、輕松地設置苛刻的應用。例如, 進行 模板移液時,微小的誤差即可導致平行樣之間的 Cq 值產生很大的區別,因此 qPCR 需要將核酸模板一致地移液至反應中。

      更快、更好的工作流程

      SC9000 96 在實際工作中的應用

      許多研究人員正在使用多道移液器進行分析,于是考慮 SC9000 96 是否可簡化其工作流程。他們通過基于實驗流程對多道移液器和 SC9000 96 進行比較性實驗,發現 SC9000 96 提供與多道移液器一樣高質量的數據,但是使工作流程加速了 5~10 倍。研究人員對生產率的提高感到非常滿意。

      研究人員需要為其團隊找到更快速地使用 PCR 制備高質量的基因分型 DNA 的方法。流程中兩個耗時的步驟為從母板中分裝三個復制板,然后在熱循環之將 PCR master mix 加至每個孔中。研究人員將多道移液器用于各步驟,但是將 SC9000 96 用于其流程后,每制備兩塊PCR 板即可 可節省 30-45 分鐘,將 SC9000 96 用于高處理量應用,發現其功能多樣,現在很多研究人員已在 PCR、純化與雜交過程中大量使用 SC9000 96 取代了移液器。

      高質量耗材與服務(部分) 中析儀器

      SC9000 96

      0.5 – 20 μL 96 通道手動移液工作站

      SC9000 96

      5 – 200 μL 96 通道手動移液工作站

      中析服務計劃

      SCFW-1

      年度服務計劃

      SCFW-2

      2 年服務計劃

      SCFW-3

      3 年服務計劃

      SCFW-4

      4 年服務計劃

      SCFW-5

      5 年服務計劃

      中析吸頭

       

      T2142

      工作站 10μL 盒裝 預滅菌

      T2152

      工作站 10μL 盒裝 濾芯 預滅菌

      T2162

      工作站 10μL 盒裝 低吸附 預滅菌

      T2172

      工作站 10μL 盒裝 濾芯 低吸附 預滅菌

      T2342

      工作站 200μL 盒裝 預滅菌

      T2352

      工作站 200μL 盒裝 濾芯 預滅菌

      T2362

      工作站 200μL 盒裝 低吸附 預滅菌

      T2372

      工作站 200μL 盒裝 濾芯 低吸附 預滅菌

      T2442

      工作站 1000μL 盒裝 預滅菌

      T2452

      工作站 1000μL 盒裝 濾芯 預滅菌

      T2462

      工作站 1000μL 盒裝 低吸附 預滅菌

      T2472

      工作站 1000μL 盒裝 濾芯 低吸附 預滅菌

      T2542

      工作站 1250μL 盒裝 預滅菌

      T2552

      工作站 1250μL 盒裝 濾芯 預滅菌

      T2562

      工作站 1250μL 盒裝 低吸附 預滅菌

      T2572

      工作站 1250μL 盒裝 濾芯 低吸附 預滅菌

       

      可重復使用的標準型聚丙烯儲液槽、深孔板

       

      D0160

      平底儲液槽(190mL)

      D2140

      8 道儲液槽(22mL)

      D3130

      12 道儲液槽(15mL)

      D6170

      96 道儲液槽(195mL)

      D7150

      384 道儲液槽(185mL)

      D4120

      24 方孔板錐底,10mL

      D5110

      48 方孔深孔板 U 底,4.6mL

      D5100

      48 圓孔深孔板 U 底,3.5mL

      D6040

      96 方孔深孔板 U 底,1.0mL

      D6060

      96 方孔深孔板 U 底,1.6mL

      D6061

      96 方孔深孔板 V 底,1.6mL

      D6080

      96 方孔深孔板 U 底,2.2mL

      D6090

      96 方孔深孔板 V 底,2.3mL

      D6041

      96 圓孔深孔板 U 底,1.0mL

      D6042

      96 圓孔深孔板 V 底,1.0mL

      D6070

      96 圓孔深孔板 U 底,2.0mL

      D6010

      96 圓孔微孔板 V 型底,0.36mL

      D6020

      96 圓孔微孔板 U 型底,0.4mL

      D6030

      96 方孔板錐底,0.5mL

      D7000

      384 微孔板,240μL

       

      儀器

      20μl 的 SC9000

      200μl 的 SC9000

       

      準確性

      20 μL: ± 1.0 %

      200 μL: ± 0.8 %

      10 μL: ± 1.2 %

      1 00 μL: ± 1.0 %

      2 μL: ± 6.0 %

      20 μL: ± 2.0 %

      1 μL: ± 12.0 %

      5 μL: ± 5.0 %

       

      重復性

      20 μL: ≤ 0.8 %

      200 μL: ≤ 0.4 %

      10 μL: ≤ 1.0 %

      100 μL: ≤ 0.6 %

      2 μL: ≤ 5.0 %

      20 μL: ≤ 1.5 %

      1 μL: ≤ 10.0 %

      5 μL: ≤ 3.5 %

      通道

      96 通道

      96 通道

      體積增量

      0.02 μL

      0.2 μL

      兼容樣式

      96 孔與 384 孔

      96 孔與 384 孔

      孔板位置

      4

      4

      移液技術

      空氣置換式

      空氣置換式

      電源要求

      n/a

      n/a

      尺寸 ( 長 x 寬 x 高 )

      32cmx45cmx39cm

      32cmx45cmx39cm

      基本技術規格

       

       

      中析對于產品的優化升始終鍥而不舍,

      如產品參數發生變化,可通過官網了解新信息。

       

      SC9000 96 & 384-channel manual fluid station

      One complete 96-well pipette provides 0.5~20 μL and 5~200 μL

       

      20 µL and 200 µL SC9000 96 fast, versatile lab assistant

      The designed 20 μL and 200 μL SC9000 96 have the advantages of fast speed, high accuracy and easy to use.Based on an understanding of how researchers work and how the overall workflow fits the laboratory, SC9000 96 provides excellent accuracy and precision, a good ergonomic design, and virtually no training.

      SC9000 96 offers two ranges: 0.5~20 μL and 5-200 μL, for excellent accuracy and accuracy.

      SC9000 96 is compared with single and multichannel pivers for 96-well pipettes at one time, with 384-well plates only four times, thus avoiding the risk of skipping or repeating plate addition.

       

      Highly reproducibility—The high inter-channel consistency of SC9000 96 provides high-quality analytical data.

      Simple — Unlike automatic or semi-automatic pipette stations, SC9000 96 requires no programming, training and electricity!

      Validated—Validated by the vast majority of common life science applications, SC9000 96 can substantially accelerate experimental speeds such as ELISA and qPCR,And it will not affect the data quality.

       

      Reliable, affordable—Medium produced SC9000 96 maximizes quality and performance standards and provides good value for each research project.

       

      Accelerate the working process

      For genomics, proteomics, and cell-based work, 96 and 384-well plates allow researchers to set multiple samples in a compact style, thus significantly enhancing downstream analysis.Despite the advantages of the 96 and 384-well plates, they are challenging to operate:

       

      Single and multichannel pipettes are not expensive but are slow and boring when filling multiple plates and greatly increase the risk of skipping or repeating filling.

       

      Automatic pipette systems provide higher volumes of processing, but often require dedicated space, electricity, operational training, and fairly complex programming knowledge.

       

      SC9000 96 addresses these problems by manually manual 96-well filling to of the 96 and 384-well plates.It is compact and requires no power use, and offers the following two ranges: 0.5~20 μL and 5~200 μL.Fully automatic SC9000 96 is easy to use and almost without training.

      The following examples illustrate how SC9000 96 can improve protein, nucleic acid, and cell-based Technologies 

      Maximize data quality with a one-time 96-channel pipette completion

      The operation is simple and intuitive, similar to the manual pipette, and filling the 96-well microplate in three steps, which has many advantages over the multi-channel pipette.SC9000 96 channels 96 channels thus faster than the 8 or 12 channel pipette and improves the data quality of rigorous experiments requiring limitations such as ELISA.For example, the following describes the workflow on how SC9000 96 can improve enzyme-based experiments:

       

      Technology

      Working principle

      PCR, along with the qPCR

      PCR/qPCR reagent was easily pived into 96-well plates using a medium suction head

      Enzyme-linked immunosorbent assay

      Reagent were quickly added and initiated / sped in all 96 wells

      Protein Crystallography

      Apply the buffer to the well plate quickly for droplet suspension

      Luminex analysis

      Buffers, antibodies, and other solutions were continuously added to the Luminex plates

      Drug compound screening points

      Sensors, biomolecules, and compounds were added quickly and accurately to 96 / 384-well plates

      Sample preparation was sorted

      Buffers, enzymes, and nucleic acids were also assigned

      Clean clean samples

      Precipitation and purification were accelerated by the 96-channel pipettes

      Standard enzyme analysis

      The enzyme, buffer and substrate were accurately and accurately to the pore plate

      Cell culture settings

      Create a copy board in seconds

      Cells were cultured with siRNA treatment

      The siRNAs was liquid easily and accurately transferred to the culture plate

      Cell analysis

      Accurate reagents were used by dividing cells with up to 96 samples

       

      Perfect for a simultaneous reaction

      SC9000 96 can initiate and s reactions in all pore plates, thus improving the experimental analysis with high timeliness of ELISA etc.The simultaneous 96-well plate fluid solution can eliminate the difference between holes and the need to quickly complete the analysis.

      Never skip or repeat the hole plate pipette

      When treating the 96-well plate with a single or multichannel pipetter, the plate may be skipped and the pipette repeated.The SC9000 96 fills in simultaneously

      All 96-well plates make it impossible to skip or accidentally repeatedly pipetate into the same plate.

      Purity of trusted consumables

      Fully assured that the complete inertia of SC9000 96 consumables will never have any impact on the laboratory results.The suction and reservoir tanks have been shown to exclude DNA, DNA enzyme, RNA enzyme, thermoplasma and ATP.

      Rest assured with the most demanding applications

      The accuracy of the 20 μL SC9000 96 was 0.5 μL.As a very accurate and accurate pipette workstation, SC9000 96 can be used to quickly and easily set up the most demanding applications.For example, when performing template pipettes, small errors can result in a large difference in the Cq values between the parallel samples, so that qPCR needs to consistently remove the nucleic acid template into the reaction.

      Faster, better workflowApplication of SC9000 96 in practical work

      Many researchers are using multichannel pipettes for analysis, and therefore consider whether SC9000 96 can simplify its workflow.Using comparative experiments on multipipettes and SC9000 96 based on experimental procedures, they found that SC9000 96 provided as high quality data as multipipettes, but accelerated the workflow by 5~10-fold.The researchers were very pleased with the productivity increase.

      Researchers need to find ways for their team to prepare quality genotyping DNA using PCR.The two time-consuming steps in the process are packing three replicate plates from the mother plate and then adding PCR master mix to each well prior to the heat cycle.Multiple pipettes for various steps, but using SC9000 96 for its process saved 30-45 minutes for each two PCR plates for high processing applications, and found diverse, and many researchers have largely replaced SC9000 96 during PCR, purification and hybridization.

      High-quality consumables and services (in part)

      Analysis instrument

      SC9000 96

      0.5 20 μL 96 channel manual fluid shift station

      SC9000 96

      5 200 μL 96 Channel manual fluid shift station

      Analysis Service Plan

       

      SCFW-1

      Annual Service Plan

      SCFW-2

      2-year service plan

      SCFW-3

      3-year service plan

      SCFW-4

      A 4-year service plan

      SCFW-5

      A 5-year service plan

      Analysis of the head

      T2142

      The Workstation 10 μL cassette was pre-sterilized

      T2152

      Workstation 10 μL cartridge element presterilization

      T2162

      Workstation 10 μL cassette with low adsorption pre-sterilization

      T2172

      Workstation 10 μL box of filter element low adsorption pre-sterilization

      T2342

      Workstation 200 μL box was pre-sterilized

      T2352

      Workstation 200 μL cartridge element pre-sterilization

      T2362

      The Workstation 200 μL cassette was loaded with low adsorption for pre-sterilization

      T2372

      Workstation 200 μL cartridge element low adsorption pre-sterilization

      T2442

      Workstation 1000 μL box for pre-sterilization

      T2452

      Workstation 1000 μL box filter element presterilization

      T2462

      Workstation 1000 μL cassette with low adsorption presterilization

      T2472

      Workstation 1000 μL cartridge element low adsorption pre-sterilization

      T2542

      The Workstation 1250 μL cassette was pre-sterilized

      T2552

      Workstation 1250 μL cartridge cartridge presterilized

      T2562

      Workstation 1250 μL cassette with low adsorption pre-sterilization

      T2572

      Workstation 1250 μL cartridge element low adsorption pre-sterilization

       

      reusable standard polypropylene storage tank, deep hole plate

       

      D0160

      Flat-bottom liquid storage tank (190mL)

      D2140

      8 Storage tanks (22mL)

      D3130

      12 Storage tanks (15mL)

      D6170

      96 Storage tanks (195mL)

      D7150

      384 Reservoir (185mL)

      D4120

      24 Square hole plate cone bottom, 10mL

      D5110

      48 Square hole deep hole plate U bottom, 4.6mL

      D5100

      48 Round hole deep hole plate U bottom, 3.5mL

      D6040

      96 Square hole deep hole plate U bottom, 1.0mL

      D6060

      96 Square hole deep hole plate U bottom, 1.6mL

      D6061

      96 Square hole deep hole plate V bottom, 1.6mL

      D6080

      96 Square hole deep hole plate U bottom, 2.2mL

      D6090

      96 Square hole deep hole plate V bottom, 2.3mL

      D6041

      96 Round hole deep hole plate U bottom, 1.0mL

      D6042

      96 Round hole deep hole plate V bottom, 1.0mL

      D6070

      96 Round hole deep hole plate U bottom, 2.0mL

      D6010

      96 V bottom, 0.36mL

      D6020

      96 Round hole microplate type U bottom, 0.4mL

      D6030

      96 Square hole plate cone bottom, 0.5mL

      D7000

      384 Microwell plate, 240 μL

       

      Instruments

      The SC9000 of 20 μl

      SC9000 for 200 μl

       

      Accuracy

      20 μL: ± 1.0 %

      200 μL: ± 0.8 %

      10 μL: ± 1.2 %

      1 00 μL: ± 1.0 %

      2 μL: ± 6.0 %

      20 μL: ± 2.0 %

      1 μL: ± 12.0 %

      5 μL: ± 5.0 %

       

      Repeatability

      20 μL: ≤ 0.8 %

      200 μL: ≤ 0.4 %

      10 μL: ≤ 1.0 %

      100 μL: ≤ 0.6 %

      2 μL: ≤ 5.0 %

      20 μL: ≤ 1.5 %

      1 μL: ≤ 10.0 %

      5 μL: ≤ 3.5 %

      channel

      96 channel

      96 channel

      Volume increment

      0.02 μL

      0.2 μL

      Compatible style

      96 wells with 384 wells

      96 wells with 384 wells

      Position of the hole plate

      4

      4

      Fluid-moving technique

      Air replacement

      Air replacement

      Powersupply requirements

      n/a

      n/a

      Dimensions (Long x Wide x High)

      32cmx45cmx39cm

      32cmx45cmx39cm

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

      售微信微信公賬號

      該公司產品分類: 高通量移液 煙氣黑度儀

      CBP-048-02美基因擴增PCR超凈工作臺

       美VWR基因擴增PCR超凈工作臺

      PCR Workstation, C.B.S. Scientific
      Supplier: C B S Scientific
      超凈工作臺Unit protects against contamination in sensitive PCR amplification reactions. UV irradiation of working area prior to use blocks replication of contaminating DNA sequences by causing adjacent pyrimidines to undergo dimerization. Workstation protects against airborne or cross-contamination by limiting exposure of experimental setup to open lab environment.
      The 12-hour count-down timer with time-hold position (supplied with the UV germicidal lamp) conveniently controls PCR workstation decontamination. To decontaminate, the user simply UV-irradiates the work area with doors closed prior to PCR procedure and just after use. The acrylic, non-ventilated PCR workstation measures 61Hx61Dcm (24x24") and is available in widths of 76.2cm (30"), 91.4cm (36") (single door closure), and 121.9cm (48") (double door closure).12小時的的時間保持位置定時器(提供紫外線殺菌燈)方便地控制的PCR工作站凈化。凈化,用戶只需紫外光照射工作區門關閉程序之前和之后使用PCR。丙烯酸不通風的PCR工作站的措施61hx61dcm24x24,可在寬度76.2cm(30(36單扇門關閉),121.9cm(48雙扇門關閉)。
      Dual UV bulb option decreases the possibility of PCR amplification of contaminating DNA by delivering twice the intensity of UV light and irradiating what otherwise might be shadowed areas. The Dual UV bulb format is recommended when the workstation will be used to decontaminate apparatus and reagents.雙重紫外線燈泡的選擇減少污染的DNA所提供的強度的UV光照射兩次,不然可能陰影區域的PCR擴增的可能性。雙重紫外線燈泡格式建議當工作站將用于凈化設備和試劑
      Choose between an acid resistant black laminate or stainless steel work surface. Each PCR workstation is equipped with the following: tempered safety glass fascia, duplex 110V electrical outlet mounted in ceiling (for domestic use), two fluorescent lamps, one or two (dependent on single or dual) UV germicidal (250nm) lamps with 12-hour timer, and single or double door closures.選擇個耐酸黑板或不銹鋼工作臺面。每個PCR工作站配備了如下鋼化安全玻璃面板,安裝在天花板雙工110V電源插座,兩個熒光燈,個或兩個依賴于單或雙紫外殺菌250nm12小時定時,或雙關閉
      Accessory table and accessory locking casters transform the PCR workstation into a moveable work area that doesn’t infringe on valuable benchtop work space.附件表和鎖腳輪變換PCR工作站為活動的工作區域,不侵犯寶貴的臺式工作空間
      Ordering Information: Gascock CB-TCG and vacuum cock CB-TCV are factory installed. PCR workstations are available with 220V electrical option for international use; contact your VWR sales representative for more information.訂購信息:gascock cb-tcg和真空旋塞cb-tcv工廠安裝。PCR工作站可與際上使用220V電源選項;
      PCR Workstation with Dual UV Light

      Work Surface Material
      Supplier No.
      Dimensions
      VWR Catalog Number
      Unit
      Stainless Steel
      P-048-202-SS
      61D x 61H x 121.9W cm (24 x 24 x 48")
      CBP-048-202-SS
      Each
      Black Laminate
      P-048-202
      61D x 61H x 121.9W cm (24 x 24 x 48")
      CBP-048-202
      Each
      Stainless Steel
      P-030-202-SS
      61D x 61H x 76.2W cm (24 x 24 x 30")
      CBP-030-202-SS
      Each
      Black Laminate
      P-036-202
      61D x 61H x 91.4W cm (24 x 24 x 36")
      CBP-036-202
      Each
      Stainless Steel
      P-036-202-SS
      61D x 61H x 91.4W cm (24 x 24 x 36")
      CBP-036-202-SS
      Each
      Black Laminate
      P-030-202
      61D x 61H x 76.2W cm (24 x 24 x 30")
      CBP-030-202
      Each

      PCR Workstation with Single UV Light

      Work Surface Material
      Supplier No.
      Dimensions
      VWR Catalog Number
      Unit
      Black Laminate
      P-036-02
      61D x 61H x 91.4W cm (24 x 24 x 36")
      CBP-036-02
      Each
      Stainless Steel
      P-048-02-SS
      61D x 61H x 121.9W cm (24 x 24 x 48")
      CBP-048-02-SS
      Each
      Black Laminate
      P-048-02
      61D x 61H x 121.9W cm (24 x 24 x 48")
      CBP-048-02
      Each
      Stainless Steel
      P-036-02-SS
      61D x 61H x 91.4W cm (24 x 24 x 36")
      CBP-036-02-SS
      Each
      Stainless Steel
      P-030-02-SS
      61D x 61H x 76.2W cm (24 x 24 x 30")
      CBP-030-02-SS
      Each
      Black Laminate
      P-030-02
      61D x 61H x 76.2W cm (24 x 24 x 30")
      CBP-030-02
      Each

       https://media.vwr.com/stibo/web/4677435.jpg
      該公司產品分類: VITLAB實驗室用品 各種實驗室儀器耗材 Bel-Art產品 Corning各種管類 Corning各種瓶類 Corning耗材 96孔半裙邊PCR板|微量離心管|離心管蓋子|移液器吸頭|帶蓋離心管|離心管樣品盒 LABCON產品 電導儀|酸度計|分析天平|自動滴定儀|紫外風光光度計|紫外消毒燈|電泳系統|電穿孔儀|成像系統|細胞融合儀|便攜式測氧儀|放射測檢儀|細胞計數儀|血液分散器|氣體檢測器|溫度搖控探針|移液系統|測定儀|基因擴增儀|血凝觀測儀|水平電泳系統|芯片試劑系統|蛋白電泳系統|細胞破碎儀|酶標儀|顯微鏡|比色計|折射儀 迷你離心機|接種環消毒器|超聲波清洗設備|蠕動泵|試劑泵|真空泵|水浴鍋|恒溫加熱設備|加熱模塊|單雙瓶洗眼器|沖淋器|通用培養箱|分子雜膠爐|干燥箱|烘箱|真空爐|勻漿器|均質機|混合分散設備|振蕩器|微型離心機|冷凍離心機|濃縮離心機|物生安全柜|紫外工作臺|超凈工作臺|干冰儲存柜|凍干機|液氮罐|動物麻醉機|解剖臺|超低溫冰箱|冷藏箱|液相色譜柜 洗手液|消毒液|乳膠手套|低溫手套|隔熱手套|丁腈手套|防護口罩|防護服|鞋套|圍帽|擦試布|N95口罩 VWR實驗室防護用品 過濾器/過濾裝置 培養皿|凍存盒|厭氧培養盒、厭氧產氣袋|八排聯管|過濾器|巴斯德吸管|粘度計|壓舌板|涂布棒|接種針、環|細胞刮刀|一次性鑰匙|移液槽|離心管|移液管|凍存管|吸頭|槍頭|透析袋|透析夾子|移液槍|無菌采樣袋|管|取樣管|試劑瓶|廣口瓶|培養瓶|閃爍瓶|洗瓶|離心瓶|玻璃試管|燒杯|量筒|漏斗|燒瓶|酶標板|封口膜|封板膜|橡膠管|分液器|陰離子交換膜 彩色指示膠帶|標簽|高壓滅菌膠帶|塑料、玻璃、鋁制稱量盤|稱量紙|細胞、血球計數板|多健計數器|筆觸式計數器|蓋玻片|載玻片|生物處理袋|實驗室銳器安全盒||基因芯片玻片|烘箱、培養箱溫度計|數顯溫度計|記錄儀|多功能氣壓計|定時器|不銹鋼篩子|簡易洗眼器|實驗室冰桶 VWR實驗室特殊耗材 Corning康寧產品 VWR分析|光學儀器|環境檢測|風速測定|氣體檢測及其他系統 VWR實驗室常用設備 VWR實驗室常用耗材

      N3000雙通道色譜數據工作站

        N3000雙通道色譜數據工作站整套包括:數據采集卡、安裝軟件(光盤)、采集卡間通訊線、雙通道信號線(含啟動開關)、接線樁、說明書、保修單。采集卡分串口與USB接口兩種,有通用型色譜工作站與GPC色譜工作站,另有小型實驗室信息管理系統。

        N3000雙通道色譜數據工作站參數規格

        輸入信號范圍: -200毫伏-1.5伏

        信號分辨率: 全量程1微伏,不分檔

        最高采樣頻率: 40點/秒

        積分靈敏度: 1微伏•秒

        重現性: 同一樣品的6次重復進樣:保留時間RSD《5‰,峰高及面積RSD《2%,面積百分比RSD《1%

        最低峰高檢測限: 5微伏

        最小峰寬檢測限: 0.5秒

        最小面積%檢測限: ppm

        最大面積比檢出限: 1:106

        最大連續運行時間: 96小時

        定量方法: 歸一法、修正歸一法、內標法、外標法、指數法

        負峰檢測: 可對單一或多個負峰進行積分,無需反轉,減少誤差。

        基線補償功能: 可對程序升溫及梯度洗脫分析進行基線補償。

      該公司產品分類: 二手設備 液相零件維修 貿易

      BJ-2CD博迅BJ-2CD升級型雙人單面垂直凈化工作臺

       

      產品介紹BJ-2CD凈化工作臺是一種能通過智能設定來控制操作區高潔凈度空氣的凈化設備,該設備采用單向空氣流動,室內空氣經過預過濾器進入凈壓箱,再經過高效濾器,最后在操作區內形成高度潔凈的單向空氣流。

      產品功能HEPA破損、預失效報警功能差壓顯示功能恒風速功能殺菌、照明聯鎖功能多參數定量顯示功能累計工作時間、時鐘顯示功能

      產品特點外殼采用優質冷軋鋼板,操作臺面采用SUS304拉絲不銹鋼材質,耐腐蝕,清洗方便;采用高效離心式風機,轉速穩定,噪音。采用LCD大屏幕液晶顯示屏,定量顯示風速、累計工作時間、壓差、時鐘、HEAP運行狀態等工作參數;配置有高效HEPA空氣過濾器,設有預過濾器為中效過濾系統,可有效延長高效過濾器的使用壽命;HEPA出現失效、破損能實現聲光可視報警提示;風速能在0.1-0.6m/s范圍內,設定為六段并能實數顯示;移動門采用配重式移門,可在規定范圍內任意定位;照明燈、殺菌燈聯鎖裝置,確保使用安全;配置防濺內置電源插座及氣源、水源接口;前部5°角傾斜,滿足人體工程學原理,操作更舒適;箱體與機架分離便于搬運和移動,機架帶有移動腳輪及定位平衡立柱,移動靈活,固定方便可靠。

      技術參數型號:BJ-2CD顯示方式:LCD空氣流向:垂直流工作面:一個潔凈等極:100級@≥0.5μm(美聯邦209E)工作區風速范圍:0.1-0.6m/s(可調)噪音:≤62dB振動半峰值:≤3μm(X、Y、Z方向)照度:≥300LX工作區尺寸(mm):1300×700×502外型尺寸(mm):1460×744×1557高效過濾器規格及數量(mm):1236×549×50×①熒光燈/紫外線規格及數量:40W×①/30W×①重量(kg):205功率(kw):0.37電源:AC220±10V  50/60Hz

      該公司產品分類: 凝膠成像分析系統 酸度計 試驗箱 電熱板 升降臺 勻漿機 電阻爐 攪拌器 乳化機 旋轉蒸發器 除濕機 離心機 振蕩器 搖床 水浴鍋 濁度儀 紫外可見分光光度計 聲級計 硬度計 球磨機 電泳儀

      最新產品

      熱門儀器: 液相色譜儀 氣相色譜儀 原子熒光光譜儀 可見分光光度計 液質聯用儀 壓力試驗機 酸度計(PH計) 離心機 高速離心機 冷凍離心機 生物顯微鏡 金相顯微鏡 標準物質 生物試劑
      亚洲阿v天堂在线观看2019,97免费人妻视在线视频,成人网站不卡在线观看,亚洲成av人电影在线无码
      <legend id="dnf07"></legend>
        • <tr id="dnf07"><dfn id="dnf07"></dfn></tr>

          <dl id="dnf07"><label id="dnf07"></label></dl>