DI-RL6CEDAR思達扭力校正儀器
| Bolting measurement of screwbolt | |
| 仠 TORQUE TESTER 丂DIS-RL series | |
| Separate type merit! Detection part is compact. | |
 | DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled. |
 | DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely. |
| DIS-RL6 Measurement to 6 N丒m | |
| A new function is carried （1） Display Board Became Legible. 丂（A Measurement modea unit. Other coded data is丂displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. | |
| The main functions丂（DIS series） 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time （every about 1/180 seconds）.丂 仩 USB terminal data output | |
| Specification | DIS-RL05 | DIS-RL2 | DIS-RL6 | |||
| Measuring range | 2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in | 0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in | 0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in | |||
| Accuracy | 亇0.5% （or less 499亇3digit） | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW （rightleft） | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second by RS232C. | |||||
| Decision function | Setting of torque value | A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| clearance | It is a display clearance in set-up time. （0.5 - 3.0 sec） | |||||
| One-touch zero | A clear button is pushedit is a zero. data output. | |||||
| Data spec. | Data transfer | ASCII format （Baud rate : 19200） | ||||
| Data memory | 800 data stored | |||||
| Power supply | Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3hours | |||||
| Continunous working time | 10 hours | |||||
| Meter outside type dimension | 100（W） x105（D） x33 （H） （It does not contain by the projection thing.） | |||||
| Weight | Meter part 520g | |||||
| Bit/Socket part | 兂4 | HEX 6.35 | ||||
| Accessories （one piece each） | 兂4 bits （亄）丂侐0/侐1 | 6.35HEX bits （亄）丂侐1/侐2 | ||||
| Receipt case | ||||||
| AC/DC adaptor | ||||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
激光校正儀
扭力扳手校正儀
扭力扳手校正儀 扭力扳手校正儀 扭力扳手校正儀 扭力扳手校正儀 扭力扳手校正儀
扭力扳手校正儀
簡要介紹 
HB系列扭力扳手檢定儀 
雙量程扭力扳手檢定儀 ■ HB系列扭力測試儀是用于校準扭力扳手扭矩的儀器。儀器有手動、電動兩種測試方式，適用于“1/4”、“3/8”、“1/2”等多種規(guī)格的扭力扳手的扭力校準。產品具有操作簡單、測試精確等優(yōu)點，是科研部門、工廠實驗室必備的檢測設備。 技術指標
JGJ-1型光干涉式甲烷測定器校正儀
| |||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||
