香蕉啪啪网站免费，AV在线影院亚洲第一，国产成人亚洲无码综合，在线视频中文字幕第一页，国产成人亚洲综合无码区，人妻热视频精品，动漫一区亚洲一区日韩一区，日韩妖精一区二区无码视频

BD80/120W廣州博勵德國凱馳代理大型全自動KARCHER洗地機

產地/品牌︰德國凱馳Karcher

德國凱馳（廣州博勵）BD80/120W BP大型手推式自走型自動洗地吸干機

產品介紹：KARCHER德國凱馳（廣州博勵）BD80/120W憑借各120升凈/污水箱的超大水箱容量、的工作視野范圍、強勁耐用的技術，凱馳該款超高性能洗地吸干機，成為當今全球大型手推式地面洗地機的新寵，是您必須在行走洗地條件下的最理想選擇！

技術參數：德國凱馳Karcher（廣州博勵）全自動洗地機吸干機
洗地寬度毫米	800
吸水寬度毫米	990
凈/污水箱升	120/120
洗地效率平米/小時	3200
刷子轉速轉/分	200
刷子觸地壓力（可調）	36 克/平方厘米
電機功率瓦	1660
重量公斤	170

產品描述與應用:KARCHER德國凱馳（廣州博勵）BD80/120W超高性能洗地吸干機，能夠滿足長時間、高負荷工作要求，其對向轉動的盤刷，最大化節約用水，延長您的工作時間。

應用領域：可廣泛使用于工廠、倉庫、物流中心等地面的清潔與維護等…

廣州市博勵建材有限公司是德國凱馳KARCHER授權中國代理與凱馳KARCHER戰略級銷售中心,廣州博勵主營凱馳KARCHER全線產品經銷批發與零售,凱馳清潔設備包括: KARCHER高壓清洗機,KARCHER高壓水槍, KARCHER洗地機,KARCHER掃地機,KARCHER清掃車,KARCHER吸塵器,KARCHER吸塵吸水機,KARCHER刷地機單擦機,KARCHER拋光打蠟晶面機，KARCHER地毯清洗機, KARCHER蒸汽清洗機,KARCHER零部件工業清洗機,KARCHER工業防爆吸塵器等德國凱馳KARCHER清潔設備全系列產品。

廣州博勵：德國KARCHER授權華南凱馳銷售中心及凱馳維修服務中心！

KARCHER凱馳原裝清潔設備及KARCHER原裝凱馳配件的！

Karcher德國凱馳廣州戰略級合作代理-廣州市博勵建材有限公司

該公司產品分類： Karcher德國凱馳掃地機 Karcher德國凱馳清潔設備配件 Karcher德國凱馳拋光打蠟單擦機 Karcher德國凱馳工業吸塵器 Karcher德國凱馳吸塵吸水機 Karcher德國凱馳真空吸塵器 Karcher德國凱馳駕駛式洗地車 Karcher德國凱馳手推式洗地吸干機 Karcher德國凱馳冷熱水高壓水槍 Karcher德國凱馳冷水高壓清洗機 Karcher德國凱馳吸塵機 Karcher德國凱馳洗地機洗地車 Karcher德國凱馳高壓清洗機

FKY-電線桿裂縫寬度測試儀

電線桿裂縫寬度測試儀主要技術參數：

主機參數屏幕尺寸：5英寸液晶分辨率：160×128 體積：195×140×45mm 重量：0.8kg主機外殼防水、防塵、防震測量范圍0.01 ~ 2.00mm讀數精度0.005mm放大倍數40倍最小分度0.02mm供電方式內置鋰電池連接線長2.5m主機重量0.8kg工作環境溫度-10℃～40℃包裝規格材質：工程塑料體積：×315×170mm 重量：5kg

該公司產品分類：耗材壓力儀表瓶類檢測儀微型水泵，真空泵電阻率測定儀便攜式電測水位計糧食水分測定儀促銷產品折光儀/折射儀定氮儀，消煮爐照度計活性炭測試儀晶閘管測試儀可控硅控制器焊接檢驗尺無菌檢查薄膜過濾器管樁荷載測試儀

CSB-EL011580RA大鼠白介素10(IL-10)ELISA KIT

Rat Interleukin 10（IL-10）

ELISA Kit

Catalog No. CSB-E04595r

（96T）

l This immunoassay kit allows for the in vitro quantitative determination of rat IL-10 concentrations in serum, plasma ａnd Tissue Homogenates.

l Expiration date six months from the date of manufacture

l FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES.

PRINCIPLE OF THE ASSAY

The microtiter plate provided in this kit has been pre-coated with an antibody specific to IL-10. Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated polyclonal antibody preparation specific for IL-10 and Avidin conjugated to Horseradish Peroxidase （HRP） is added to each microplate well ａnd incubated. Then a TMB （3,3＇,5,5＇ tetramethyl-benzidine） substrate solution is added to each well. Only those wells that contain IL-10, biotin-conjugated antibody ａnd enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of a sulphuric acid solution ａnd the color change is measured spectrophotometrically at a wavelength of 450 nm ± 2 nm. The concentration of IL-10 in the samples is then determined by comparing the O.D. of the samples to the standard curve.

DETECTION RANGE

3.12 pg/ml-200 pg/ml. The standard curve concentrations used for the ELISA’s were 200 pg/ml, 100 pg/ml, 50 pg/ml, 25 pg/ml, 12.5 pg/ml, 6.25 pg/ml, 3.12 pg/ml.

SPECIFICITY

This assay recognizes rat IL-10. No significant cross-reactivity or interference was observed.

SENSITIVITY

The minimum detectable dose of rat IL-10 is typically less than 0.78 pg/ml.

The sensitivity of this assay, or Lower Limit of Detection （LLD） was defined as the lowest protein concentration that could be differentiated from zero.

MATERIALS PROVIDED

Reagent	Quantity
Assay plate	1
Standard	2
Sample Diluent	1 x 20 ml
Biotin-antibody Diluent	1 x 10 ml
HRP-avidin Diluent	1 x 10 ml
Biotin-antibody	1 x 120μl
HRP-avidin	1 x 120μl
Wash Buffer	1 x 20 ml （25×concentrate）
TMB Substrate	1 x 10 ml
Stop Solution	1 x 10 ml

STORAGE

1. Unopened test kits should be stored at 2-8°C upon receipt ａnd the microtiter plate should be kept in a sealed bag. The test kit may be used throughout the expiration date of the kit, provided it is stored as prescribed above. Refer to the package label for the expiration date.

2. Opened test plate should be stored at 2-8°C in the aluminum foil bag with desiccants to minimize exposure to damp air. The kits will remain stable until the expiring date shown, provided it is stored as prescribed above.

3. A microtiter plate reader with a bandwidth of 10 nm or less ａnd an optical density range of 0-3 OD or greater at 450nm wavelength is acceptable for use in absorbance measurement.

REAGENT PREPARATION

Bring all reagents to room temperature before use.

1. Wash Buffer If crystals have formed in the concentrate, warm up to room temperature ａnd mix gently until the crystals have completely dissolved. Dilute 20 ml of Wash Buffer Concentrate into deionized or distilled water to prepare 500 ml of Wash Buffer.

2. Standard Centrifuge the standard vial at 6000-10000rpm for 30s. Reconstitute the Standard with 1.0 ml of Sample Diluent. This reconstitution produces a stock solution of 200 pg/ml. Allow the standard to sit for a minimum of 15 minutes with gentle agitation prior to making serial dilutions. The undiluted standard serves as the high standard （200 pg/ml）. The Sample Diluent serves as the zero standard （0 pg/ml）. Prepare fresh for each assay. Use within 4 hours ａnd discard after use.

3. Biotin-antibody Centrifuge the vial before opening. Dilute to the working concentration using Biotin-antibody Diluent（1:100）, respectively.

4. HRP-avidin Centrifuge the vial before opening. Dilute to the working concentration using HRP-avidin Diluent（1:100）, respectively.

Precaution: The Stop Solution provided with this kit is an acid solution. Wear eye, hand, face, ａnd clothing protection when using this material.

OTHER SUPPLIES REQUIRED

— Microplate reader capable of measuring absorbance at 450 nm, with the correction wavelength set at 540 nm or 570 nm.

— Pipettes ａnd pipette tips.

— Deionized or distilled water.

— Squirt bottle, manifold dispenser, or automated microplate washer.

— An incubator which can provide stable incubation conditions up to 37°C±0.5°C.

SAMPLE COLLECTION AND STORAGE

l Serum Use a serum separator tube （SST）ａnd allow samples to clot for 30 minutes before centrifugation for 15 minutes at 1000 g. Remove serum ａnd assay immediately or aliquot and store samples at -20°C. Centrifuge the sample again after thawing before the assay. Avoid repeated freeze-thaw cycles.

l Plasma Collect plasma using citrate, EDTA, or heparin as an anticoagulant. Centrifuge for 15 minutes at 1000 g within 30 minutes of collection. Assay immediately or aliquot ａnd store samples at -20°C. Centrifuge the sample again after thawing before the assay. Avoid repeated freeze-thaw cycles.

l Tissue Homogenates 100mg tissue was rinsed with 1X PBS, homogenized in 1 mL of 1X PBS ａnd stored overnight at -20° C. After two freeze-thaw cycles were performed to break the cell membranes, the homogenates were centrifuged for 5 minutes at 5000 x g, 2 - 8°C. The supernate was assayed ａnd removed immediately. Alternatively, aliquot ａnd store samples at -20°C or -80℃. Centrifuge the sample again after thawing before the assay. Avoid repeated freeze-thaw cycles.

Note: Grossly hemolyzed samples are not suitable for use in this assay.

ASSAY PROCEDURE

Bring all reagents ａnd samples to room temperature before use. It is recommended that all samples, standards, ａnd controls be assayed in duplicate. All the reagents should be added directly to the liquid level in the well. The pipette should avoid contacting the inner wall of the well.

1. Add 100μl of Standard, Blank, or Sample per well. Cover with the adhesive strip. Incubate for 2 hours at 37°C.

2. Remove the liquid of each well, don’t wash.

3. Add 100μl of Biotin-antibody working solution to each well. Incubate for 1 hour at 37°C. Biotin-antibody working solution may appear cloudy. Warm up to room temperature ａnd mix gently until solution appears uniform.

4. Aspirate each well ａnd wash, repeating the process three times for a total of three washes. Wash: Fill each well with Wash Buffer （200μl）ａnd let it stand for 2 minutes, then remove the liquid by flicking the plate over a sink. The remaining drops are removed by patting the plate on a paper towel. Complete removal of liquid at each step is essential to good performance.

5. Add 100μl of HRP-avidin working solution to each well. Cover the microtiter plate with a new adhesive strip. Incubate for 1 hour at 37°C.

6. Repeat the aspiration ａnd wash five times as step 4.

7. Add 90μl of TMB Substrate to each well. Incubate for 10-30 minutes at 37°C. Keeping the plate away from drafts ａnd other temperature fluctuations in the dark.

8. Add 50μl of Stop Solution to each well when the first four wells containing the highest concentration of standards develop obvious blue color. If color change does not appear uniform, gently tap the plate to ensure thorough mixing.

9. Determine the optical density of each well within 30 minutes, using a microplate reader set to 450 nm.

CALCULATION OF RESULTS

Using the professional soft "Curve Exert 1.3" to make a standard curve is recommended, which can be downloaded from our web.

Average the duplicate readings for each standard, control, ａnd sample ａnd subtract the average zero standard optical density. Create a standard curve by reducing the data using computer software capable of generating a four parameter logistic （4-PL） curve-fit. As an alternative, construct a standard curve by plotting the mean absorbance for each standard on the x-axis against the concentration on the y-axis ａnd draw a best fit curve through the points on the graph. The data may be linearized by plotting the log of the IL-10 concentrations versus the log of the O.D. ａnd the best fit line can be determined by regression analysis. This procedure will produce an adequate but less precise fit of the data. If samples have been diluted, the concentration read from the standard curve must be multiplied by the dilution factor.

LIMITATIONS OF THE PROCEDURE

— The kit should not be used beyond the expiration date on the kit label.

— Do not mix or substitute reagents with those from other lots or sources.

— It is important that the Standard Diluent selected for the standard curve be consistent with the samples being assayed.

— If samples generate values higher than the highest standard, dilute the samples with the appropriate Standard Diluent ａnd repeat the assay.

— Any variation in Standard Diluent, operator, pipetting technique, washing technique, incubation time or temperature, ａnd kit age can cause variation in binding.

— This assay is designed to eliminate interference by soluble receptors, binding proteins, and other factors present in biological samples. Until all factors have been tested in the Immunoassay, the possibility of interference cannot be excluded.

TECHNICAL HINTS

— Centrifuge vials before opening to collect contents.

— When mixing or reconstituting protein solutions, always avoid foaming.

— To avoid cross-contamination, change pipette tips between additions of each standard level, between sample additions, ａnd between reagent additions. Also, use separate reservoirs for each reagent.

— When using an automated plate washer, adding a 30 second soak period following the addition of wash buffer, and/or rotating the plate 180 degrees between wash steps may improve assay precision.

— To ensure accurate results, proper adhesion of plate sealers during incubation steps is necessary.

— Substrate Solution should remain colorless or light blue until added to the plate. Keep Substrate Solution protected from light. Substrate Solution should change from colorless or light blue to gradations of blue.

— Stop Solution should be added to the plate in the same order as the Substrate Solution. The color developed in the wells will turn from blue to yellow upon addition of the Stop Solution. Wells that are green in color indicate that the Stop Solution has not mixed thoroughly with the Substrate Solution.

該公司產品分類：科研試劑

GAL50-UK-2RS軸承FAG_GAL50-UK-2RS軸承報價

上海東晟軸承，是高速發展的需要而誕生的專業化GAL50-UK-2RS軸承FAG銷售公司，長期經銷世界各大知名品牌軸承進口軸承型號查詢系統下載：瑞典SKF、德國FAGNSK軸承、INA、美國TIMKEN、日本NSK、NTN、IKO、KOYO、THK、NACHI進口軸承。歡迎來電咨詢GAL50-UK-2RS軸承尺寸、價格、技術支持或同型號其他品牌替換等詳細資料！如果您對FAGGAL50-UK-2RS軸承有疑問，請聯系我們獲取更多GAL50-UK-2RS軸承的最新信息 FAG軸承。FAG供應商供應的產品主要應用于FAG軸承地區的造紙、機械制造IKO日本、起重機器、汽車配套維修、工程機械、礦山機械、紡織機械聯系方式：電話：傳真： NADELLA伸縮導軌GAL50-UK-2RS軸承 GAL50-UK-2RS軸承價格 GAL50-UK-2RS軸承尺寸GAL50-UK-2RS軸承報價 GAL50-UK-2RS軸承圖片NADELLA軸承【GAL50-UK-2RS軸承】尺寸參數表：軸承型號：GAL50-UK-2RS軸承品牌：FAG軸承系列：桿端軸承NADELLA伸縮導軌上海東晟軸承有限公司提供FAG軸承GAL50-UK-2RS的鍛壓機床、回流焊接機、消聲室、銑齒機、消音降噪設備、等技術參數。公司以打造專業經銷進口軸承企業一流的服務為經營理念，不斷為進口軸承型號查詢系統下載NSK軸承用戶提供優質產品，不斷提升自我的技術服務，使機械無憂運轉。使FAG軸承客戶在我們這得到滿意的服務和一流的產品。推薦型號：NACHI2311軸承 2310 NACHI 2307軸承 NACHI 2308 NACHI2306 NACHI2305軸承 2304 6905ZENR軸承 6005ZENR 6205ZENR軸承 6305ZENR 62/28ZENR軸承 63/28ZENR 6806ZENR軸承 6906ZENR 71922CD/DT 6220ZZ軸承 6013-RS1 6905V軸承 3216B.TVH UCT209軸承 TIMKEN軸承德國NADELLA伸縮導軌公司網站：http://www.bearings365.comhttp://www.zcsearch.comhttp://www.sh-bearings.comhttp://www.zhoucheng188.comhttp://www.ikont.com.cnhttp://www.shdszc.com參考資料：http://www.zhoucheng188.com/FAG/GAL50-UK-2RS.html

該公司產品分類：軸承

RJ518050旋轉關節--K型接頭單路同軸旋轉關節

RJ518050旋轉關節產品特征：

[DC to 40 GHz]

0-40GHz

K型接頭

接觸式單路同軸旋轉關節，可傳輸直流電

技術參數：

Specifications
Interface Type	2.92 Female ( 50 ohms )	Style	I Type
Frequency Range	DC to 40 GHz	Phase WOW (Degrees Max.)	1°
VSWR, Max.	1.30 @ DC to 10 GHz	Insertion Loss, ,Max.	0.25 dB @ DC to 10 GHz
	1.45 @ 10 to 20 GHz		0.40 dB @ 10 to 20 GHz
	1.60 @ 20 to 30 GHz		0.55 dB @ 20 to 30 GHz
	1.75 @ 30 to 40 GHz		0.70 dB @ 30 to 40 GHz
VSWR WOW	0.1	Insertion Loss WOW	0.02 dB
Peak Power, Max.	500 W	Average Power, Max.	60 W @ 1 GHz
Rotating Speed, Max.	250 rpm	Life Time, Min.	5 Million Revolutions
Starting Torque	3.5 Ncm.	Continuous Rotational Torque	3.5 Ncm Max.
Axial Load On Interface, Max	± 1 N	Radial Load On Interface, Max.	± 1 N
Body Material	Stainless Steel	Contact Pin Material	Beryllium Copper
DC Power Ability	3 A * 24V @ Full RF Power	Contact Surface Finish	Gold Plate
Weight	0.014 kg	Marking	Adhesive Label
Insulator Material	PTFE / Teflon	IP Protection Level	IP 64 Per EN 60529
Temperature(Ambient Range)	-40 to +60 °C (Operation)	Humidity	85% (Operation)
Temperature(Ambient Range)	-50 to +70 °C (Storage)	(Non-Condensing), Max.	95% (Storage)

如對產品有任何疑問，可電話聯系雅馳，雅馳實業供應旋轉關節、微波射頻器件，質量保證，歡迎咨詢洽談：。

該公司產品分類：衛星天線慣性導航系統 天線微波射頻儀器通訊儀器儀表光通訊儀器儀表光學儀器儀表光通訊儀器儀表

KEM自動滴定儀AT-710系列

KEM自動滴定儀AT-710系列KEM自動滴定儀AT-710系列主要特點:AT-710M:觸摸屏和操作單元之間無線連接，同時控制四臺自動滴定測量單元。通過使用無線適配器(藍牙)，操作單元和滴定裝置可以不用電纜連接。在測量樣品過程中有危害性氣體時，可將滴定裝置放置在排煙柜中，由無線傳輸?shù)牟僮鲉卧獔?zhí)行滴定。AT-710M/AT-710S:滴定劑的信息存儲在滴定管上的芯片中。即使滴定管單元轉移到另一個滴定裝置,也不需要重新輸入滴定劑信息。AT-710M/AT-710S/AT-710B:滴定管單元特殊的開關閥門。減少滴定管和開關閥門間的死體積。特殊結構的設計可減少滴定劑的使用量和快速更換滴定單元。AT-710M/AT-710S/AT-710B:智能化電極電纜。電極的信息可透過電纜上傳感器存儲相關資料。電極校準的數據可應用到不同的自動滴定儀上。KEM自動滴定儀AT-710系列技術參數:

名稱	自動電位滴定儀
儀器型號	AT-710M	AT-710S	AT-710B
儀器組成	MCU-710M+AT-710+螺旋槳或磁力攪拌器	MCU-710S+AT-710+螺旋槳或磁力攪拌器	AT-710+螺旋槳或磁力攪拌器
測量范圍	1)電位: -2000.0～2000.0mV2) pH: -20.000～20.000pH3)溫度: 0～100°C
滴定方式	自動滴定，自動間歇滴定，間歇滴定，恒pH滴定
	石油中和值滴定，COD滴定
滴定類型	電位滴定(酸堿，氧化還原，沉淀)，光度滴定，極化滴定，電導滴定
終點判斷	全量滴定(自動終點)，自動終點滴定，設定終點滴定
	交叉點滴定，自動終點/設定終點滴定
特殊應用	量電極電位(pH, mV)，酸解離常數(pKa)
	同時記錄雙通道電位，學習滴定
輸入設置	觸摸屏輸入		按鍵輸入
顯示	1) 8.4英寸彩色液晶屏，800x600點		1) LED背景光源液晶屏
	2)英文/日文/中文/韓文/俄文/西語/德語/法語		2)英文/日文/中文/韓文/俄文/西語
	3)四個通道同時顯示	3)一個通道顯示	3)一個通道顯示
計算	濃度計算，統計計算(平均值，標準差，相對標準差)，自動輸入空白和滴定度
數據儲存	500組樣品結果		50組樣品結果
GLP認證	登記操作者/使用群組管理滴定劑:提示滴定度測量日期/指示滴定劑剩余量/提示滴定管活塞更換日期/提示滴定劑換日期/滴定度測量履歷性能檢查:提醒計劃檢查日期/記錄檢查結果電極管理:記錄校正日期/記錄校正履歷/電極檢查/電極檢查履歷滴定管驗證:驗證/記錄驗證結果時間管理:顯示操作時間		登記操作者/記錄檢查結果/電極校正記錄/滴定管精度確認/時間管理
滴定管單元	20mL玻璃滴定管附褐色保護套(標配)，選配: 10mL，5mL或1mL
滴定管精確度	50mL滴定管(自動注入器): ±0.5mL20mL滴定管: 0.02mL 重復性: 0.01mL10mL滴定管: 0.015mL 重復性: 0.005mL5mL滴定管: 0.01mL 重復性: 0.003mL1mL滴定管: 0.005mL 重復性: 0.001mL
擴大器	1) STD: pH(mV), mV，雙通道(標配)2) PTA: pH(mV), mV，光度,三通道3) POA: pH(mV), mV，極化,三通道4) CMT: pH(mV), mV，電導,三通道5) TET: pH(mV)，pH(mv), mV，三通道
外部輸出	RS-232C x3		RS-232C x 2
	打印機，電子天平，數據軟件(SOFT-CAP)
	USB x; 1		USB x 1
	U盤，熱敏打印機，A4打印機，鍵盤，條碼機，腳踏開關, USB集線器		U盤，熱敏打印機，鍵盤，條碼機，腳踏開關, USB集線器，安卓設備
	LAN x 1 :電腦(PC)
擴充功能	測量單元:電位滴定儀(AT-710)容量水分儀(MKV-710)庫侖水分儀MKC-710)最多四臺測量單元
	自動活塞滴定管:最多可控制10臺滴定管驅動單元(包括主機兩臺)
	多樣品自動進樣器: CHA-600，CHA-700		CHA-700
使用環境	1)溫度: 5～35°C2)相對濕度: 85%RH以下
電源	AC100～240V，50Hz/60Hz
耗電量	主機:約30瓦打印機:約7瓦		主機:約20瓦打印機:約7瓦
尺寸	觸摸屏: 225(W) x 190(D) x 42(H)mm
	滴定單元: 141(W) x 296(D) x 367(H)mm(不包括管路)打印機: 106(W) x 180(D) x 88(H)mm
重量	觸摸屏:約1.5公斤
	滴定單元:約4.0公斤打印機:約0.4公斤

該公司產品分類：電磁旋轉粘度計熱分析相關儀器石油產品專用儀器食品飲料專用儀器熱流計、熱流儀導熱儀、熱導儀糖度計、糖度儀折光儀、折射計密度計、密度儀卡氏水分測定儀自動電位滴定儀

BQS2KWBQS2KW排污排沙潛水泵

BQS2KW排污排沙潛水泵

產品介紹 BQS（W）礦用隔爆型排污排沙潛水電泵，是泵和電動機組合一體的電力排灌設備，外型美觀，結構簡單，密封性能好，性能穩定，壽命長，安裝使用方便，且可以長期在水下連續作業，被廣泛用于煤礦立井、斜井及井底散煤泥地自動化排水。內裝式電泵，水由電動機夾層中流過，有效的延長了電泵的使用壽命；外裝式電泵，葉輪采用雙流道大過流結構，運行平穩，排污能力強，防纏繞，無堵塞現象，并且有體積小，重量輕，攜帶方便的特點。結構特點 BQS（W）系列的礦用隔爆型排污排沙潛水電泵嚴格根據煤炭行業標準MT/T671-2005《煤礦用隔爆型潛水電泵》、中華人名共和國國家執行標準GB3836-2000《爆炸性氣體環境用電氣設備》設計制作，電動機采用Y型干式隔爆型三相異步電動機，具有啟動轉矩大、運行性能好、噪聲低、體積小、重量輕、維護方便等特點，以及優良的隔爆結構性能和較高的防護等級，適用于含有甲烷或煤塵等爆炸性氣體環境、有爆炸危險的礦井下采掘面及巷道等場所與水泵配套使用。電泵采用O形橡膠密封圈作為靜密封，結構性能好，采用橡膠硫化曲線控制技術保障了O型圈耐潮防老化的質量及密封性能。動密封采用兩套機械密封，并有油室隔離保護，有效地為轉動摩擦副提供潤滑，形成流體膜潤滑保護，同時釋放在運動過程中積聚的熱量，從而延長了機械密封的使用壽命，確保了密封性能。電泵的流體部件材質采用耐磨合金鑄鐵，水泵部分采用流體機械設計及平衡技術，有效的延長了電泵的使用壽命。用途含有甲烷或煤塵爆炸危險的煤礦井下采掘工作面排水，煤礦立井、斜井施工排水，礦井無水倉井底主排水，主井井底散煤倉自動排水，老塘、無人區涌水自動排水，煤礦井下含有煤塵、泥沙等較小固體顆粒的地下水排放，清水倉排水，救災搶險排水，城市環境系統中污水排放處理使用條件輸送介質溫度應不超過40℃，含固體顆粒的介質、其體積濃度一般不超過2%，輸送介質pH值在4~10范圍內，工作環境溫度0~40℃，水泵潛入水深值不超過5m，介質中固體最大粒直徑不大于水泵流道過流斷面最小尺寸的50%基本參數

型號	流量 m3/h	楊程 m	功率 kW	電壓 V	電流 A	額定轉速 r/min	電泵效率 %	通過顆粒最大直徑 mm
15-15-2.2	15	15	2.2	380或660或1140	5.12或2.98	3000	33.3	10
25-10-2.2	25	10	2.2	380或660或1140	5.12或2.98	3000	34.5	10

手機：18764769169 電話：

傳真: QQ:598298090

網站：http://www.jnzhuoxin.com

該公司產品分類：電機車電機車配件電泵風泵鑿巖機械

CKB200系列CKB型單向楔塊超越離合器

CKB型（B200型）單向楔塊超越離合器

特性及應用

B200型號為無內環和軸承支撐的楔塊式單向離合器，使用時需配合軸承安裝以承受軸向和徑向負載，使用者亦需要提拱潤滑油脂供應及外部油封。

外環與機壁用鍵槽方式安裝，軸直接安裝在離合器內，所以用于離合器安裝的軸在磨削后需要硬化處理到HRC58~62，軸的錐度每50mm不應超過0.01mm，適用于極限轉速：1000~2400r/min公稱轉矩為60~1250N.m。常用于包裝機械、冶金機械、礦山機械和石油機械、化工機械、水泥機械、電站等機械傳動。

CKB無內環的單向楔塊型超越離合器基本參數和主要尺寸長度單位：mm

安裝參考范例（Mounting e×ample）

IKA磁力攪拌器中國總代理

德國IKA磁力攪拌器RTC

IKA RCT磁力攪拌器產品優勢新一代最為暢銷的實驗室儀器。New: 強力馬達，轉速范圍廣New: 雙重溫度控制模式用于快速加熱介質

IKA暢銷型RCT磁力攪拌器價格優惠

- 內置溫度控制系統 - 隨機附送 PT 1000 溫度傳感器 (PT 1000.60) - 通過數顯屏可對加熱溫度和攪拌轉速進行精確控制 - 數字顯示安全溫度設置 - 高溫警示>> ，提示用戶盤面高溫，小心燙傷 - 錯誤代碼數字顯示 - 加熱盤安全回路可調 (5-360°C ) - 安全控制型加熱磁力攪拌器，適于無人操作 - DIN 12878 標準接口，可連接外部溫度及精確控溫，如：ETS-D5 - 先進的熱控技術，安全水平高 - 儀器密閉性好，保護等級高(IP 42),使用壽命長 - 磁性強 - 隨機附送 H 100 保護膜

IKA暢銷型RCT磁力攪拌器價格優惠

IKA RCT磁力攪拌器規格參數

加熱磁力攪拌器	RCT 基本型（安全型）
攪拌點位數目	1
每個攪拌點位最大攪拌量 (H2O)	20 l
單個攪拌點位的轉速偏差	5 %
最大攪拌量 (H2O)	20 l
電機輸入功率	16 W
電機輸出功率	9 W
轉速顯示	LED
速度范圍	50 - 1500 rpm
攪拌子最大長度	80 mm
加熱輸出功率	600 W
加熱速度 (1升 \| H2O)	6.5 K/min
加熱溫度范圍	室溫 - 310 °C
加熱溫度控制	LED
加熱溫度控制精確度	1 ±K
轉速控制	無級
可調安全溫度回路最小值	50 °C
可調安全溫度回路最大值	360 °C
外接溫度傳感器接口	德國工業標準DIN 12 878
帶傳感器控溫精確度	1 ±K
工作盤材質	鋁合金
工作盤外形尺寸	Ø135 mm
外形尺寸	160 x 85 x 270 mm
重量	2.5 kg
允許環境溫度	5 - 40 °C
允許相對濕度	80 %
DIN EN 60529 保護方式	IP 42
電壓	220 - 230 / 115 / 100 V
頻率	50/60 Hz
儀器輸入功率	650 W

訂購電話 13679255673

該公司產品分類：檢測儀天平培養箱酶標儀顯微鏡離心機 移液器