MPXM2053GS壓力傳感器,主要以氣壓測量為主,適合用于醫療器械,氣體壓力控制等領域,輸出數字信號,原裝,現貨熱賣!
MPX10和MPXV10GC系列器件是壓阻式硅壓力傳感器,可提供非常精確的線性電壓輸出,輸出與被測壓力成正比.這種標準的、低成本未補償傳感器允許制造商根據應用需求設計和添加外部溫度補償和信號調理網絡.由于飛思卡爾的單元件應變片設計的可預測性,簡化了補償技術.特性低成本硅剪應力應變片專利技術供電電壓比率輸出導軌和卷帶運輸方式可選差壓和表壓可選耐用型環氧材料單片式器件或熱塑性塑料(PPS)表貼封裝
供應MPX2200DP壓力傳感器.
供應壓力傳感器MPX2100DP
MPX5010/MPXV5010G/MP3V5010系列壓阻式傳感器是型的單片硅壓力傳感器,可廣泛用于各種應用,特別是采用帶A/D輸入的微控制器或微處理器的應用.該款傳感器集的微機械加工技術、薄膜金屬化和雙極性工藝于一身,可提供與被測壓力成正比、精確的高電平模擬輸出信號.
專用文檔MPX5010:MPX5010、MPXV5010、MPVZ5010系列集成式硅壓力傳感器,片內信號調理、溫度補償和校準MPVZ5010G:MPVZ5010GW集成式硅壓力傳感器,片內信號調理、溫度補償和校準MP3V5010:MP3V5010,集成式硅壓力傳感器MP3V5010,片內信號調理、溫度補償和校準特性0到85°C范圍內最大誤差為5.0%適用于基于微處理器或微控制器的系統耐用型環氧材料單片式封裝和熱塑性塑料(PPS)表貼封裝溫度補償范圍從-40°C到+125°C硅剪應力應變片專利技術差壓和表壓結構可選表面貼裝(SMT)或過孔安裝(DIP)結構可選
The MPX5100 series piezoresistive transducer is a state-of-the-art monolithic silicon pressure sensor designed for a wide range of applications, but particularly those employing a microcontroller or microprocessor with A/D inputs. This patented, single element transducer combines advanced micromachining techniques, thin-film metallization, and bipolar processing to provide an accurate, high level analog output signal that is proportional to the applied pressure.Features• 2.5% Maximum Error over 0° to 85°C• Ideally suited for Microprocessor or Microcontroller-Based Systems• Patented Silicon Shear Stress Strain Gauge• Available in Absolute, Differential and Gauge Configuration• Durable Epoxy Unibody Element• Easy-to-Use Chip Carrier OptionORDERING INFORMATIONDevice Name CaseNo.# of Ports Pressure Type DeviceMarking None Single Dual Gauge Differential AbsoluteUnibody Package (MPX5100 Series)MPX5100A 867 • • MPX5100AMPX5100AP 867B • • MPX5100APMPX5100D 867 • • MPX5100DMPX5100DP 867C • • MPX5100DPMPX5100GP 867B • • MPX5100GPSmall Outline Package (MPXV5100 Series)MPXV5100GC6U 482A • • MPXV5100GMPXV5100GC7U 482C • • MPXV5100GMPXV5100DP 1351 • • MPXV5100DPMPXV5100GP 1369 • • MPXV5100GP15 to 115 kPa (2.2 to 16.7 psi)0.2 to 4.7 V Output Typical Applications• Patient Monitoring• Process Control• Pump/Motor Control• Pressure Switching
飛思卡爾的MPXHZ6115A系列傳感器集成了雙極運算放大器電路和薄膜電阻器網絡,可提供高輸出信號和溫度補償.該傳感器封裝能夠抵御高濕度條件和一般汽車媒體.憑借體積小巧的優點,以及片上集成的高性,飛思卡爾壓力傳感器成為汽車系統設計人員合理、經濟的選擇.MPXHZ6115A系列壓阻換能器是的、信號調節的半導體單片壓力傳感器.該傳感器結合了的微機械加工技術、薄膜敷金屬法、雙極半導體處理功能,可以提供的、與施加壓力成比例的模擬輸出信號. 特性防潮、抵御普通的汽車媒體經改進的高溫精確度0o至85°C之間的最大誤差率為1.5%適合基于微處理器或微控制器的系統溫度補償范圍:-40°C至+125°C耐用的熱塑(PPS)表面安裝封裝
The MPXH6300A series sensor integrates on chip, bipolar op amp circuitry and thin film resistor networks to provide a high output signal and temperature compensation. The small form factor and high reliability of on chip integration make the Freescale pressure sensor a logical and economical choice for the system designer.FeaturesImproved Accuracy at High Temperature Available in Small and Super Small Outline Packages 1.5% Maximum Error over 0? to 85?C Ideally suited for Microprocessor or Microcontroller?Based Systems Temperature Compensated from ?40? to +125?C Durable Thermoplastic (PPS) Surface Mount Package Product SpecificationsPressure Rating - Max (psi) 44 Pressure Rating - Max (kPa) 300
The Freescale MPXH6115A series Manifold Absolute Pressure (MAP) sensor for engine control is designed to sense absolute air pressure. Freescale’s MAP sensor integrates on–chip, bipolar op amp circuitry and thin film resistor networks to provide a high output signal and temperature compensation. The small form factor and high reliability of on–chip integration make the Freescale MAP sensor a logical and economical choice for the automotive system designer.Features1.5% Maximum Error over 0° to 85°CImproved Accuracy at High TemperatureIdeally suited for Microprocessor or Microcontroller–Based SystemsTemperature Compensated from –40° to +125°CDurable Thermoplastic (PPS) Surface Mount Package
MPX5999D壓阻式傳感器是型壓力傳感器.該傳感器應用范圍廣泛,而且特別部署了帶有模/數輸入的微控制器或微處理器. 這種獲得專利的、單元件傳感器(X–ducer)集的微機械加工技術、薄膜金屬化和雙極型半導體工藝于一身,可提供與被測壓力成正比、精確的高電平模擬輸出信號. 特性溫度補償從0到85°C適用于基于微處理器或微控制器的系統硅剪應力應變片專利技術耐用型環氧材料單片式器件