DI-9M-8日本思達電批扭力測試儀
| Management of electrik screw driver |
| 仠Torque Meter 丂DI-9M-8/08 |
| DI-9 series is most suitable for checkingcontrolling the torque of Electric ScrewdriverTorque Driver. |
| upgrade丂The main changed parts (1) In a display board, "measurement mode", a "measurement unit", "the maximum, the minimum, an average, etc.", etc. display. (2) Change of Measurement Unit Can be Performed N-m <=> kgf-cm <=>lbf-in Etc. (3) Setup of Various Numerical Values Can be EasyCan Carry Out Speedily. (4) Calculation of Maximum, Minimum,Average Became Intelligible. (5) The call of the saved data became easy. The output of data also became intelligible. (6) Fault charge protection. It is pilot-lamp lighting during charge. (7) Data Output is USB Form (B Type). (8) Memory Data are 800 Affairs (9) Real-time Output is Every 1 / 180 Seconds. |
 |
丂 丂 |
| The best for everyday check of an electric driver Wide measurement range (0 - 8000digit), it corresponds to various set torques Can measure without inversion/ rolling-back work efficiently by OW joint (PAT.P). |
| Specification | DI-9M-8 | DI-9M-08 | |
| Measuring range | 0.020-8 N | 2.0-800 mN | |
| 0.20乣80 kgf丒cm | 0.020乣8 kgf丒cm | ||
| 0.20乣70 lbf丒in | 0.020乣7 lbf丒in | ||
| Accuracy | 亇0.5% (499 digit or less 亇3digit) | ||
| Display | The 4 figures digital display of LCD | ||
| The measurement direction | CW-CCW (rightleft) | ||
| Zero return by one touch | Return to zero by pressing clear button. | ||
| Measurement Mode | Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output) | ||
| Highlow limits judging function | Highlow value are measurement within the limits,can be set up. | ||
| Real-time Output | Load torque value is outputted every about1/ 180 second. | ||
| The Maximum, the minimum,the average value display | The maximum, the minimum, average value,the data number of 30 data are displayed.It saves to ten channels. | ||
| Data Output | ASCII format (baud rate 19200) | ||
| Auto power save | 10 minutes no use, automatically switch off. | ||
| Power supply | Ni-Cd chargeable battery 1.2V 亊 5cells 700mAh | ||
| Charging time | About 3hours | ||
| Continuous working time | About 12hours | ||
| clearance | It is a display clearance in set-up time. (0.1 - 3.0 sec) | ||
| Socket size | 仩 20mm/ 仩9.5mm | ||
| Dimension / Weight | W:160亊D:125亊H:55 / About 1kg | ||
| Recommend buffer accessories | Measuring joint OW-20/OW-60 | Measuring joint OW-025/OW-10 | |
| Cube (with a 5th page screw hole)丂20x20x20 丂(M2.6/M3/M4/M5/M6 Tap processing) | |||
| AC/DC adaptor | |||
| Exclusive receipt case | |||
| An inspection report, a proofreading certificate, a traceability system figure | |||
| 仠 MEASURING JOINT OW series | |
 | Since our company developed the buffer with little influence of fricative, stable measurement could be performed Moreover ,it does not need to reverse-rotate at the time of measurement, work efficiency improved. |
| Specification | Type | ||||
| OW-025 | OW-10 | OW-20 | OW-60 | ||
| Measuring range N | 0.25 | 1 | 2 | 6 | |
| Mechanical life 乮times乯 | 10,000 | 8,000 | 5,000 | 5,000 | |
| Outer diameter size 乮mm乯 | Bit engagement part (screw part) | M2.6 cross recess screw | M3 cross recess screw | M4 cross recess screw | M6 cross recess screw |
| The standard screw is cross recess screw but they may be altered as necessary | |||||
| Outside diameter | 冇28 | 冇32 | 冇32 | 冇38 | |
| Height | 44 | 51 | 51 | 69 | |
| 俬nstallation | 20square 亊4(t) | ||||
CD-10M日本思達電批扭力測試儀
| Management of electric screw driver |
| 仠Torque Meter 丂CD-100M/10M |
 |
| upgrade丂The main changed parts (1) In a display board, "measurement mode", a "measurement unit", "the maximum, the minimum, an average, etc.", etc. display. (2) Change of Measurement Unit Can be Performed N-m <=> kgf-cm <=>lbf-in Etc. (3) Setup of Various Numerical Values Can be EasyCan Carry Out Speedily. (4) Calculation of Maximum, Minimum,Average Became Intelligible. (5) The call of the saved data became easy. The output of data also became intelligible. (6) Fault charge protection. It is pilot-lamp lighting during charge. (7) Data Output is USB Form (B Type). (8) Memory Data are 800 Affairs (9) Real-time Output is Every 1 / 180 Seconds. |
| Specification | CD亅100M | CD亅10M | ||
| Measuring range (at the time of Track) | 0.10乣10丂N丒m | 1.0乣100丂們N丒m丂 | ||
| 1.0乣100 kgf丒cm | 0.10乣10 kgf丒cm | |||
| 1.0乣90 lbf丒in | 0.10乣9 lbf丒in | |||
| Accuracy | 亇0.5亾乮F/S乯(199 or less digit亇1digit) | |||
| Display | The 3.5 figures digital display of LCD | |||
| The measurement direction | CW-CCW (rightleft) | |||
| Measurement Mode | Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output) | |||
| Highlow limits judging function | Highlow value are measurement within the limits,can be set up. | |||
| Real-time Output | Load torque value is outputted every about1/ 180 second. | |||
| The Maximum, the minimum,the average value display | The maximum, the minimum, average value,the data number of 30 data are displayed.It saves to ten channels. | |||
| Automatic Clearance | Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance | |||
| One-touch zero | A clear button is pushedit is a zero.丂 Data is outputed. | |||
| Data output | ASCII format (baud rate 19200) | |||
| Power supply | Ni-Cd chargeable battery 1.2V亊5cells 700mAh | |||
| Auto power save | 10 minutes no use, automatically switch off. | |||
| Charging time | About 3 hours | |||
| Continunous working time | About 12 hours | |||
| Socket fit mouth | 仩 20mm/ 仩9.5mm | |||
| Weight | Abbreviation 1 kg | |||
| Outside dimension | 160乮W乯亊125乮D乯亊55乮H乯 | |||
| Attachment | Measurement joint丂SJ50/SJ10K | Measurement joint丂SJ10 | ||
| Accessories (one piece each) | AC/DC adaptor | |||
| Exclusive receipt case | ||||
| An inspection report, a proofreading certificate, traceability system figure | ||||
| SJ50 | SJ10 | About an adapter 亙measurement joint丂SJ乮PAT.P乯亜 |
 |  | It does not decompose, even if it rewinds joint too much Since the adapter attached is the coil spring compression system of the conventional system, you can use it by the conventional management method. Moreover, this adapter is special structure. It does not decompose, even if it rewinds joint too much. You can use it in comfort. |
CD-10、CD-100思達電批扭力測試儀
日本思達牌電批扭力測試儀 型號 DI-9-08 DI-9-08 CD-10 CD-100 測試范圍 0.1~800mN.m 0.001~8kgf.cm 0.001~7Lbf.in 0.001~8N.m 0.01~80kgf.cm 0.01~70Lbf.in 0.001~1N.m 0.01~10kgf.cm 0.01~9Lbf.in 0.01~10N.m 0.1~100kgf.cm 0.1~90Lbf.in 誤差 ±0.5% ±0.5% 功能 LC:LCD液晶顯示，RS：帶RS232輸出口，PO：電源自動關閉功能，IO：設定自動清零 外型尺寸 155W×125D×55H 配件 測量頭OW025/OW10包 裝盒/AC充電器各一個 測量頭OW020/OW60包 裝盒/AC充電器各一個 連接頭SJ10/包裝 盒/AC充電器各一個 連接頭SJ50包裝盒 /AC充電器各一個
規格 CD-100 CD-10 測試范圍 3.0-800.0 mNm 0.030-8.000 N叮 精度 8000-500 digit 0.5% 499-30 digit within3digit 顯示單位 lbfin-kgfcm-Nm 歸零 Return to zero by pressing clear button. Data spec. Data output Based on RS232C Baud rate:9600 Power supply Auto power off 自動電源關閉 10 min. Battery drive Ni-Cd 1.2V 5cells1200mAh 充電時間 8hrs. 連續充電時間 20hrs. 自動歸零 配備自動歸零裝置 尺寸 W:155D:125H:30 / 1kg 附件 Measuring joint SJ10/50 Measuring joint SJ10
CD-10、CD-100日本思達電批扭力測試儀
日本思達牌電批扭力測試儀 型號 DI-9-08 DI-9-08 CD-10 CD-100 測試范圍 0.1~800mN.m0.001~8kgf.cm0.001~7Lbf.in 0.001~8N.m0.01~80kgf.cm0.01~70Lbf.in 0.001~1N.m0.01~10kgf.cm0.01~9Lbf.in 0.01~10N.m0.1~100kgf.cm0.1~90Lbf.in 誤差 ±0.5% ±0.5% 功能 LC:LCD液晶顯示，RS：帶RS232輸出口，PO：電源自動關閉功能，IO：設定自動清零 外型尺寸 155W×125D×55H 配件 測量頭OW025/OW10包裝盒/AC充電器各一個 測量頭OW020/OW60包裝盒/AC充電器各一個 連接頭SJ10/包裝盒/AC充電器各一個 連接頭SJ50包裝盒/AC充電器各一個 規格 CD-100 CD-10 測試范圍 3.0-800.0 mNm 0.030-8.000 N叮 精度 8000-500 digit 0.5% 499-30 digit within3digit 顯示單位 lbfin-kgfcm-Nm 歸零 Return to zero by pressing clear button. Data spec. Data output Based on RS232C Baud rate:9600 Power supply Auto power off 自動電源關閉 10 min. Battery drive Ni-Cd 1.2V 5cells1200mAh 充電時間 8hrs. 連續充電時間 20hrs. 自動歸零 配備自動歸零裝置 尺寸 W:155D:125H:30 / 1kg 附件 Measuring jointSJ10/50 Measuring jointSJ10
DI-IM-IP200日本思達電批扭力測試儀
| Management of air tool / oil pulse tool |
| 仠Torque Tester 丂DI-1M-IP丂series |
 |
| Management of an oil pulse tool etc. High precisionlightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweightsmall, it can install in a work line. Convenient for the scheduled inspection of a tool It is brightreadable at an LED display. The high luminosity (light emitting diode) LED can be adopted as a display element, and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features 仩Blow counter. The total number of blows within fixed timetorque measured value are displayed. 仩 Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. 仩RS232C Output. It connects with data printing (printer use corresponding to RS232C),a personal computer,data can be saved easily.(Taking-in soft use of exclusive use) 仩 It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc. |
| Specification | 俢俬-侾俵-俬俹俆侽 | 俢俬-侾俵-俬俹俀侽侽 | 俢俬-侾俵-俬俹俆侽侽 | |
| Measuring range (at the time of Track) | 0.30乣50 N 3.0乣500 kgf丒cm 3.0乣430 lbf丒in | 3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in | 3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in | |
| Peak down Operating range | 0.70N?/span>m乣, 7.0kgf丒cm/ lbf丒in乣 | 7.0N?/span>m乣, 70kgf丒cm/ lbf丒in乣 | ||
| Accuracy | 亇0.5亾乮F/S乯(499 or less digit亇3digit) | |||
| Display | The 4 figures digital display of LED | |||
| The measurement direction | CW-CCW (rightleft) | |||
| Measuring mode | P-P Peak | Peak load value hold | ||
| T-R Track | Indication of real time torque value. | |||
| P-D Peak down | Indication peak down pointhold. | |||
| Display zero clearance | Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance | |||
| Blow | Measurement range | Zero to 99 blow | ||
| Measurement time | 0.1 - 9.9 seconds | |||
| Data output | RS232C conformity (baud rate 9600) | |||
| Power supply | Ni-Cd chargeable battery 1.2V亊5cells 700mAh | |||
| Auto power save | 5 minutes no use, automatically switch off. | |||
| Charging time | From empty - less than 6hours | |||
| Continunous working time | 8 hours | |||
| Meter part丂Weight | About 600g | |||
| Detection part丂Weight | about 600g | about 1kg | about 2.5kg | |
| Meter part丂Outside size | 146(W)亊115(D)亊48(H) 乮It does not contain by the projection part乯 | |||
| Code length | Standard 1m (there are automatic machines no less than 4m as an option.) | |||
| Accessories (one piece each) | Attache case | 乗 | 乗 | |
| AC/DC adaptor (Please choose AC adaptor out of 120V,230V.) | ||||
| An inspection report, a proofreading certificate, traceability system figure | ||||
| Detection machine size figure | Detection machine outside figure | |||
| Form | 俬俹俆侽 | 俬俹俀侽侽 | 俬俹俆侽侽 |  |
| 俙 | 兂50 | 兂60 | 兂80 | |
| 俛 | 63 | 73 | 99 | |
| 俠 | 10 | 10 | 15.5 | |
| 俢 | 兂90 | 兂110 | 兂140 | |
| 俤 | 兂74 | 兂90 | 兂116 | |
| 俥(Three division) | 兂6.3 | 兂8.3 | 兂10.5 | |
| 俧丂(Socket intuition affinity) | 9.5倱倯 | 12.7倱倯 | 19倱倯 | |
| Weight | 632g | 1.8kg | 3kg | |
DI-9M-8日本思達電批扭力測試儀
| Management of electrik screw driver |
| 仠Torque Meter 丂DI-9M-8/08 |
| DI-9 series is most suitable for checkingcontrolling the torque of Electric ScrewdriverTorque Driver. |
| upgrade丂The main changed parts (1) In a display board, "measurement mode", a "measurement unit", "the maximum, the minimum, an average, etc.", etc. display. (2) Change of Measurement Unit Can be Performed N-m <=> kgf-cm <=>lbf-in Etc. (3) Setup of Various Numerical Values Can be EasyCan Carry Out Speedily. (4) Calculation of Maximum, Minimum,Average Became Intelligible. (5) The call of the saved data became easy. The output of data also became intelligible. (6) Fault charge protection. It is pilot-lamp lighting during charge. (7) Data Output is USB Form (B Type). (8) Memory Data are 800 Affairs (9) Real-time Output is Every 1 / 180 Seconds. |
|
| 丂丂 |
| The best for everyday check of an electric driver Wide measurement range (0 - 8000digit), it corresponds to various set torques Can measure without inversion/ rolling-back work efficiently by OW joint (PAT.P). |
| Specification | DI-9M-8 | DI-9M-08 | |
| Measuring range | 0.020-8 N | 2.0-800 mN | |
| 0.20乣80 kgf丒cm | 0.020乣8 kgf丒cm | ||
| 0.20乣70 lbf丒in | 0.020乣7 lbf丒in | ||
| Accuracy | 亇0.5% (499 digit or less 亇3digit) | ||
| Display | The 4 figures digital display of LCD | ||
| The measurement direction | CW-CCW (rightleft) | ||
| Zero return by one touch | Return to zero by pressing clear button. | ||
| Measurement Mode | Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output) | ||
| Highlow limits judging function | Highlow value are measurement within the limits,can be set up. | ||
| Real-time Output | Load torque value is outputted every about1/ 180 second. | ||
| The Maximum, the minimum,the average value display | The maximum, the minimum, average value,the data number of 30 data are displayed.It saves to ten channels. | ||
| Data Output | ASCII format (baud rate 19200) | ||
| Auto power save | 10 minutes no use, automatically switch off. | ||
| Power supply | Ni-Cd chargeable battery 1.2V 亊 5cells 700mAh | ||
| Charging time | About 3hours | ||
| Continuous working time | About 12hours | ||
| clearance | It is a display clearance in set-up time. (0.1 - 3.0 sec) | ||
| Socket size | 仩 20mm/ 仩9.5mm | ||
| Dimension / Weight | W:160亊D:125亊H:55 / About 1kg | ||
| Recommend buffer accessories | Measuring joint OW-20/OW-60 | Measuring joint OW-025/OW-10 | |
| Cube (with a 5th page screw hole)丂20x20x20 丂(M2.6/M3/M4/M5/M6 Tap processing) | |||
| AC/DC adaptor | |||
| Exclusive receipt case | |||
| An inspection report, a proofreading certificate, a traceability system figure | |||
| 仠 MEASURING JOINT OW series | |
| Since our company developed the buffer with little influence of fricative, stable measurement could be performed Moreover ,it does not need to reverse-rotate at the time of measurement, work efficiency improved. |
| Specification | Type | ||||
| OW-025 | OW-10 | OW-20 | OW-60 | ||
| Measuring range N | 0.25 | 1 | 2 | 6 | |
| Mechanical life 乮times乯 | 10,000 | 8,000 | 5,000 | 5,000 | |
| Outer diameter size 乮mm乯 | Bit engagement part (screw part) | M2.6 cross recess screw | M3 cross recess screw | M4 cross recess screw | M6 cross recess screw |
| The standard screw is cross recess screw but they may be altered as necessary | |||||
| Outside diameter | 冇28 | 冇32 | 冇32 | 冇38 | |
| Height | 44 | 51 | 51 | 69 | |
| 俬nstallation | 20square 亊4(t) | ||||
CD-10M日本思達電批扭力測試儀
| Management of electric screw driver |
| 仠Torque Meter 丂CD-100M/10M |
|
| upgrade丂The main changed parts (1) In a display board, "measurement mode", a "measurement unit", "the maximum, the minimum, an average, etc.", etc. display. (2) Change of Measurement Unit Can be Performed N-m <=> kgf-cm <=>lbf-in Etc. (3) Setup of Various Numerical Values Can be EasyCan Carry Out Speedily. (4) Calculation of Maximum, Minimum,Average Became Intelligible. (5) The call of the saved data became easy. The output of data also became intelligible. (6) Fault charge protection. It is pilot-lamp lighting during charge. (7) Data Output is USB Form (B Type). (8) Memory Data are 800 Affairs (9) Real-time Output is Every 1 / 180 Seconds. |
| Specification | CD亅100M | CD亅10M | ||
| Measuring range (at the time of Track) | 0.10乣10丂N丒m | 1.0乣100丂們N丒m丂 | ||
| 1.0乣100 kgf丒cm | 0.10乣10 kgf丒cm | |||
| 1.0乣90 lbf丒in | 0.10乣9 lbf丒in | |||
| Accuracy | 亇0.5亾乮F/S乯(199 or less digit亇1digit) | |||
| Display | The 3.5 figures digital display of LCD | |||
| The measurement direction | CW-CCW (rightleft) | |||
| Measurement Mode | Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output) | |||
| Highlow limits judging function | Highlow value are measurement within the limits,can be set up. | |||
| Real-time Output | Load torque value is outputted every about1/ 180 second. | |||
| The Maximum, the minimum,the average value display | The maximum, the minimum, average value,the data number of 30 data are displayed.It saves to ten channels. | |||
| Automatic Clearance | Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance | |||
| One-touch zero | A clear button is pushedit is a zero.丂 Data is outputed. | |||
| Data output | ASCII format (baud rate 19200) | |||
| Power supply | Ni-Cd chargeable battery 1.2V亊5cells 700mAh | |||
| Auto power save | 10 minutes no use, automatically switch off. | |||
| Charging time | About 3 hours | |||
| Continunous working time | About 12 hours | |||
| Socket fit mouth | 仩 20mm/ 仩9.5mm | |||
| Weight | Abbreviation 1 kg | |||
| Outside dimension | 160乮W乯亊125乮D乯亊55乮H乯 | |||
| Attachment | Measurement joint丂SJ50/SJ10K | Measurement joint丂SJ10 | ||
| Accessories (one piece each) | AC/DC adaptor | |||
| Exclusive receipt case | ||||
| An inspection report, a proofreading certificate, traceability system figure | ||||
| SJ50 | SJ10 | About an adapter 亙measurement joint丂SJ乮PAT.P乯亜 |
| | It does not decompose, even if it rewinds joint too much Since the adapter attached is the coil spring compression system of the conventional system, you can use it by the conventional management method. Moreover, this adapter is special structure. It does not decompose, even if it rewinds joint too much. You can use it in comfort. |
CD-10/CD-100上海騰鉆電批扭力測試儀，思達電批扭力測試儀
| 詳細介紹 | ||||||||||||||||||||||||||||||||||||||
| 相關產品名稱:扭力起子,數顯扭力起子,扭力起子測試儀,扭力起子檢測儀,扭力計 品名稱： 電批扭力測試儀cd-10/cd-100 制 造 商： 思達(cedar) 產品種類： 測力、拉力儀器
| ||||||||||||||||||||||||||||||||||||||
DI-9-08/DI-9_8上海電批扭力測試儀，思達電批扭力測試儀
| 詳細介紹 | ||||||||||||||||||||||||||||||||
| 相關產品名稱:扭力起子,數顯扭力起子,扭力起子測試儀,扭力起子檢測儀,扭力計 產品名稱： 電批扭力測試儀DI-9-08/DI-9-08 制 造 商： 思達(CEDAR) 產品種類： 測力、拉力儀器
| ||||||||||||||||||||||||||||||||
DI-9-08日本CEDAR思達電批扭力測試儀
| 日本思達牌電批扭力測試儀 | ||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||
最新產品
- CLJ-BII(D)交直流兩用激光塵埃粒子計數器 2024/11/24 21:55:02
- CLJ-B330大流量激光塵埃粒子計數器 2024/11/24 21:24:22
- CLJ-B550大流量激光塵埃粒子計數器 2024/11/24 21:13:35
- CLJ-B1030大流量激光塵埃粒子計數器 2024/11/24 18:55:10
- 橡膠高低溫抗拉伸力強度試驗機 2024/11/24 14:41:42
- 中心血站冰凍血漿水浴解凍箱 2024/11/24 14:33:52
- 血站冰凍血制品解凍箱 2024/11/24 14:33:25
- CMC-185-MX成都軟起動經銷MCD201-110-T4-CV3 SSD-55KW ATS22C25Q XYR6-37KW 2024/11/24 14:31:27
- 冰凍血制品恒溫解凍箱 2024/11/24 14:30:42
- 隔水式恒溫血漿解凍箱 2024/11/24 14:30:13
- 輸血科冰凍血漿解凍儀 2024/11/24 14:29:31
- 醫用冰凍血制品解凍儀 2024/11/24 14:28:47
- 水浴式血制品血漿解凍箱 2024/11/24 14:27:29
- 臺式血漿解凍箱 2024/11/24 14:27:07
- 循環水式血漿解凍箱 2024/11/24 14:26:12
- 血液科血液制品血漿解凍箱 2024/11/24 14:25:43
- 發布動態/抗檢測原料/ 抗檢測抗115項抗檢測原粉@報價已更新 2024/11/24 13:45:34
- 發布動態/強力v1/抗檢測強力v1/高品質原料@產品價格 2024/11/24 13:44:18
- 發布動態/鹽酸達泊西汀/達泊西丁原料@產品價格 2024/11/24 13:43:06
- 發布動態/無水茶堿/茶葉提取物/茶堿/茶堿原料/動態已更新 2024/11/24 13:41:57
- 發布動態/奧利司他/奧利司他原料@產品價格 2024/11/24 13:40:39
- 發布動態/他達那非/他達那非原料/產品價格 2024/11/24 13:39:29
- 發布動態/育亨賓/鹽酸育亨賓原料@產品價格 2024/11/24 13:38:17
- 發布動態/無水茶堿/茶葉提取物/茶堿/茶堿原料/已更新報價 2024/11/24 13:37:08
- 發布動態/西地那非/西地那非原粉/西地原料/產品價格 2024/11/24 13:35:47
- 發布動態/金陽堿/金陽堿原料@產品價格 2024/11/24 13:34:37
- 發布動態/抗檢測原料/ 抗檢測抗115項抗檢測原粉@產品價格 2024/11/24 13:33:36
- 發布動態/強力v1/抗檢測強力v1/高品質原料@動態播報 2024/11/24 13:32:23
- 發布動態/鹽酸達泊西汀/達泊西丁原料@動態播報 2024/11/24 13:31:19
- 發布動態/無水茶堿/茶葉提取物/茶堿/茶堿原料/產品功能 2024/11/24 13:29:38