中文无码主页精品视频，av资源手机在线观看，人妻在线无码一区二区，国内永久福利在线视频，极品在线观看视频婷婷，欧美一级片内射在线视频播放，欧美黄色网址在线手机观看，国产精品爱舒服

DIS-RL6日本思達扭力校正儀器

Bolting measurement of screwbolt
仠 TORQUE TESTER 丂DIS-RL series
Separate type merit! Detection part is compact.
	DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled.
	DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely.
	DIS-RL6 Measurement to 6 N丒m
A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge.
The main functions丂(DIS series) 仩 Yes-no decision丂仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂仩 USB terminal data output

Specification		DIS-RL05	DIS-RL2	DIS-RL6
Measuring range		2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in	0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in	0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in
Accuracy		亇0.5% (or less 499亇3digit)
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 180 second by RS232C.
Decision function	Setting of torque value	A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
clearance		It is a display clearance in set-up time. (0.5 - 3.0 sec)
One-touch zero		A clear button is pushedit is a zero. data output.
Data spec.	Data transfer	ASCII format (Baud rate : 19200)
	Data memory	800 data stored
Power supply		Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		about 3hours
Continunous working time		10 hours
Meter outside type dimension		100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight		Meter part 520g
Bit/Socket part		兂4	HEX 6.35
Accessories (one piece each)		兂4 bits (亄)丂侐0/侐1	6.35HEX bits (亄)丂侐1/侐2
		Receipt case
		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

DIS-RL2日本思達扭力校正儀器

Bolting measurement of screwbolt
仠 TORQUE TESTER 丂DIS-RL series
Separate type merit! Detection part is compact.
	DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled.
	DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely.
	DIS-RL6 Measurement to 6 N丒m
A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge.
The main functions丂(DIS series) 仩 Yes-no decision丂仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂仩 USB terminal data output

Specification		DIS-RL05	DIS-RL2	DIS-RL6
Measuring range		2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in	0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in	0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in
Accuracy		亇0.5% (or less 499亇3digit)
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 180 second by RS232C.
Decision function	Setting of torque value	A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
clearance		It is a display clearance in set-up time. (0.5 - 3.0 sec)
One-touch zero		A clear button is pushedit is a zero. data output.
Data spec.	Data transfer	ASCII format (Baud rate : 19200)
	Data memory	800 data stored
Power supply		Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		about 3hours
Continunous working time		10 hours
Meter outside type dimension		100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight		Meter part 520g
Bit/Socket part		兂4	HEX 6.35
Accessories (one piece each)		兂4 bits (亄)丂侐0/侐1	6.35HEX bits (亄)丂侐1/侐2
		Receipt case
		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

DIS-RL05日本思達扭力校正儀器

Bolting measurement of screwbolt
仠 TORQUE TESTER 丂DIS-RL series
Separate type merit! Detection part is compact.
	DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled.
	DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely.
	DIS-RL6 Measurement to 6 N丒m
A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge.
The main functions丂(DIS series) 仩 Yes-no decision丂仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂仩 USB terminal data output

Specification		DIS-RL05	DIS-RL2	DIS-RL6
Measuring range		2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in	0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in	0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in
Accuracy		亇0.5% (or less 499亇3digit)
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 180 second by RS232C.
Decision function	Setting of torque value	A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
clearance		It is a display clearance in set-up time. (0.5 - 3.0 sec)
One-touch zero		A clear button is pushedit is a zero. data output.
Data spec.	Data transfer	ASCII format (Baud rate : 19200)
	Data memory	800 data stored
Power supply		Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		about 3hours
Continunous working time		10 hours
Meter outside type dimension		100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight		Meter part 520g
Bit/Socket part		兂4	HEX 6.35
Accessories (one piece each)		兂4 bits (亄)丂侐0/侐1	6.35HEX bits (亄)丂侐1/侐2
		Receipt case
		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

日本思達牌DI-3N-IP50/DI-3N-IP200扭力校正儀日本思達牌DI-3N-IP50/DI-3N-IP200扭力校正儀

扭力校正儀DI-3N-IP5/IP50/IP200/IP500
制造商：	思達(CEDAR)
產品種類：	測力、拉力儀器
所屬行業：	電子及電路板工業模具及五金制造行業
產品熱賣產品
產品簡介：

詳細內容

日本思達牌扭力校正儀

型號	DI-3N-IP5	DI-3N-IP50	DI-3N-IP200	DI-3N-IP500	DI-3N-IPS
測量范圍	0.01～5N.m0.1～50kgf.cm0.1～45Lbf.in	0.01～50N.m0.1～500kgf.cm0. 1～450Lbf.in	0.1～200N.m1～2000kgf.cm1～1800Lbf.in	0.1～500N.m1～5000kgf.cm0.1～4500Lbf.in	0.01～20N.m0.1～200kgf.cm0.1～180Lbf.in
誤差	±0.5%
功能	LC:LCD顯示，RS：RS232C輸出口，LH：扭力設定功能；MY：數據記憶功能PO：電源自動關閉功能IO：設定自動清零
外形尺寸	88(W)×108(D)×40(H)（不含測頭）
配件	包裝盒/AC充電器各一個	AC充電器各一個		測量頭1個DC20mmM4/M6/M8包裝盒AC充電器各一個

DIS-RL05日本思達扭力校正儀器

Bolting measurement of screwbolt
仠 TORQUE TESTER 丂DIS-RL series
Separate type merit! Detection part is compact.
	DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled.
	DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely.
	DIS-RL6 Measurement to 6 N丒m
A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge.
The main functions丂(DIS series) 仩 Yes-no decision丂仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂仩 USB terminal data output

Specification		DIS-RL05	DIS-RL2	DIS-RL6
Measuring range		2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in	0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in	0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in
Accuracy		亇0.5% (or less 499亇3digit)
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 180 second by RS232C.
Decision function	Setting of torque value	A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
clearance		It is a display clearance in set-up time. (0.5 - 3.0 sec)
One-touch zero		A clear button is pushedit is a zero. data output.
Data spec.	Data transfer	ASCII format (Baud rate : 19200)
	Data memory	800 data stored
Power supply		Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		about 3hours
Continunous working time		10 hours
Meter outside type dimension		100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight		Meter part 520g
Bit/Socket part		兂4	HEX 6.35
Accessories (one piece each)		兂4 bits (亄)丂侐0/侐1	6.35HEX bits (亄)丂侐1/侐2
		Receipt case
		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

該公司產品分類：喜百事孔徑規 塞尺 EISEN精密針規 FSK精密水平儀 RIKEN精密水平儀 RSK精密水平儀 ONO SEIKI小野轉速計 ASKER橡膠硬度計 TECLOCK得樂橡膠硬度計 ANRITSU安立溫計 PTC表面溫度計 ISUZU東京溫度計 SATO佐滕溫濕度計 SK 國產放大鏡 OTSUKA大冢臺放大鏡 PEAK放大鏡張力計 扭力工具推拉力計

DI-RL05CEDAR思達扭力校正儀器

Bolting measurement of screwbolt
仠 TORQUE TESTER 丂DIS-RL series
Separate type merit! Detection part is compact.
	DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled.
	DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely.
	DIS-RL6 Measurement to 6 N丒m
A new function is carried （1） Display Board Became Legible. 丂（A Measurement modea unit. Other coded data is丂displayed.）（2） Fault charge protection loading. It is pilot-lamp lighting during charge.
The main functions丂（DIS series）仩 Yes-no decision丂仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time （every about 1/180 seconds）.丂仩 USB terminal data output

Specification		DIS-RL05	DIS-RL2	DIS-RL6
Measuring range		2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in	0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in	0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in
Accuracy		亇0.5% （or less 499亇3digit）
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW （rightleft）
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 180 second by RS232C.
Decision function	Setting of torque value	A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
clearance		It is a display clearance in set-up time. （0.5 - 3.0 sec）
One-touch zero		A clear button is pushedit is a zero. data output.
Data spec.	Data transfer	ASCII format （Baud rate : 19200）
	Data memory	800 data stored
Power supply		Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		about 3hours
Continunous working time		10 hours
Meter outside type dimension		100（W） x105（D） x33 （H）（It does not contain by the projection thing.）
Weight		Meter part 520g
Bit/Socket part		兂4	HEX 6.35
Accessories （one piece each）		兂4 bits （亄）丂侐0/侐1	6.35HEX bits （亄）丂侐1/侐2
		Receipt case
		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure