<legend id="dnf07"></legend>
    • <tr id="dnf07"><dfn id="dnf07"></dfn></tr>

      <dl id="dnf07"><label id="dnf07"></label></dl>
    • DIS-IP200日本CEDAR扭力測試儀

      TORQUE TESTER  DIS-IP series
      Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible.  (A Measurement mode and a unit. Other coded data is displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort and Detector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspection and management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision  □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time (every about 1/180 seconds).  □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up.   It is very convenient for a continuous check. □The operation torque of a QL type and pre set type wrench driver can read measured value correctly in peak down mode (P-D).
      Specification DIS-IP05 DIS-IP5 DIS-IP50 DIS-IP200 DIS-IP500
      Measuring range (at  time of Track) 2.0~500 mN?m 0.30~50 kgf?cm 0.30~45 lbf?in
      0.030~5 N?m 0.30~50 kgf?cm 0.30~45 lbf?in
      030~50 N?m 3.0~500 kgf?cm 3.0~450 lbf?in
      3.0~200 N?m 30~2000 kgf?cm 30~1740 lbf?in
      3.0~500 N?m 30~5000 kgf?cm 30~4500 lbf?in
      Accuracy ±0.5%     (499 or less digit±3digit)
      Display The 4 figures digital display of LCD
      The measurement direction CW-CCW (right and left)
      Measuring mode P-P  Peak Peak load value hold.
      T-R  Track Indication of real time torque value.
      P-D  Peak down Holding Load Value at the moment to change from upward to downword
      C Real-time output Load torque value is outputted every about1/ 180 second .
      Decision function Setting of torque value A Maximum and a minimum value are in a measuring range, and a setup is possible. Can confirm the set value by the buzzer sound or LED.
      The Maximum, the minimum, and the average value Displays, memory and output the data number, the maximum, the minimum, and the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
      Automatic Clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
      One-touch zero Easy Zero-Adjustment with pressing CLEAR button
      Data spec. Data transfer ASCII fomat (Baud rate :19200)
      Data memory 800 data
      Power supply Ni-Cd chargeable battery 1.2V×5cells  700mAh
      Auto power save 10 minutes no use, automatically switch off.
      Charging time about 3 hours
      Continunous working time 12 hours
      Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
      Weight Meter part    520g
      Code length Standard 1m (there are automatic machines no less than 4m as an option.)
      Accessories  (one piece each)
      AC/DC adaptor
      An inspection report, a proofreading certificate, a traceability system figure

      Detection machine size figure
      Detection machine outside figure
      Form IP05/5 IP50 IP200 IP500 Detector
      Φ40 Φ50 Φ60 Φ80
      41.2 63 73 99
      5 10 10 15.5
      Φ60 Φ90 Φ110 Φ140
      Φ50 Φ74 Φ90 Φ116
      (Three division) Φ4.2 Φ6.3 Φ8.3 Φ10.5
      G (Socket intuition affinity) 6.35sq 9.5sq 12.7sq 19sq
      weight 189g 632g 1.8kg 3kg

      DIS-IP50日本CEDAR扭力測試儀

      TORQUE TESTER  DIS-IP series
      Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible.  (A Measurement mode and a unit. Other coded data is displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort and Detector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspection and management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision  □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time (every about 1/180 seconds).  □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up.   It is very convenient for a continuous check. □The operation torque of a QL type and pre set type wrench driver can read measured value correctly in peak down mode (P-D).
      Specification DIS-IP05 DIS-IP5 DIS-IP50 DIS-IP200 DIS-IP500
      Measuring range (at  time of Track) 2.0~500 mN?m 0.30~50 kgf?cm 0.30~45 lbf?in
      0.030~5 N?m 0.30~50 kgf?cm 0.30~45 lbf?in
      030~50 N?m 3.0~500 kgf?cm 3.0~450 lbf?in
      3.0~200 N?m 30~2000 kgf?cm 30~1740 lbf?in
      3.0~500 N?m 30~5000 kgf?cm 30~4500 lbf?in
      Accuracy ±0.5%     (499 or less digit±3digit)
      Display The 4 figures digital display of LCD
      The measurement direction CW-CCW (right and left)
      Measuring mode P-P  Peak Peak load value hold.
      T-R  Track Indication of real time torque value.
      P-D  Peak down Holding Load Value at the moment to change from upward to downword
      C Real-time output Load torque value is outputted every about1/ 180 second .
      Decision function Setting of torque value A Maximum and a minimum value are in a measuring range, and a setup is possible. Can confirm the set value by the buzzer sound or LED.
      The Maximum, the minimum, and the average value Displays, memory and output the data number, the maximum, the minimum, and the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
      Automatic Clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
      One-touch zero Easy Zero-Adjustment with pressing CLEAR button
      Data spec. Data transfer ASCII fomat (Baud rate :19200)
      Data memory 800 data
      Power supply Ni-Cd chargeable battery 1.2V×5cells  700mAh
      Auto power save 10 minutes no use, automatically switch off.
      Charging time about 3 hours
      Continunous working time 12 hours
      Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
      Weight Meter part    520g
      Code length Standard 1m (there are automatic machines no less than 4m as an option.)
      Accessories  (one piece each)
      AC/DC adaptor
      An inspection report, a proofreading certificate, a traceability system figure

      Detection machine size figure
      Detection machine outside figure
      Form IP05/5 IP50 IP200 IP500 Detector
      Φ40 Φ50 Φ60 Φ80
      41.2 63 73 99
      5 10 10 15.5
      Φ60 Φ90 Φ110 Φ140
      Φ50 Φ74 Φ90 Φ116
      (Three division) Φ4.2 Φ6.3 Φ8.3 Φ10.5
      G (Socket intuition affinity) 6.35sq 9.5sq 12.7sq 19sq
      weight 189g 632g 1.8kg 3kg

      DIS-IP5日本CEDAR扭力測試儀

      TORQUE TESTER  DIS-IP series
      Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible.  (A Measurement mode and a unit. Other coded data is displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort and Detector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspection and management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision  □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time (every about 1/180 seconds).  □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up.   It is very convenient for a continuous check. □The operation torque of a QL type and pre set type wrench driver can read measured value correctly in peak down mode (P-D).
      Specification DIS-IP05 DIS-IP5 DIS-IP50 DIS-IP200 DIS-IP500
      Measuring range (at  time of Track) 2.0~500 mN?m 0.30~50 kgf?cm 0.30~45 lbf?in
      0.030~5 N?m 0.30~50 kgf?cm 0.30~45 lbf?in
      030~50 N?m 3.0~500 kgf?cm 3.0~450 lbf?in
      3.0~200 N?m 30~2000 kgf?cm 30~1740 lbf?in
      3.0~500 N?m 30~5000 kgf?cm 30~4500 lbf?in
      Accuracy ±0.5%     (499 or less digit±3digit)
      Display The 4 figures digital display of LCD
      The measurement direction CW-CCW (right and left)
      Measuring mode P-P  Peak Peak load value hold.
      T-R  Track Indication of real time torque value.
      P-D  Peak down Holding Load Value at the moment to change from upward to downword
      C Real-time output Load torque value is outputted every about1/ 180 second .
      Decision function Setting of torque value A Maximum and a minimum value are in a measuring range, and a setup is possible. Can confirm the set value by the buzzer sound or LED.
      The Maximum, the minimum, and the average value Displays, memory and output the data number, the maximum, the minimum, and the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
      Automatic Clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
      One-touch zero Easy Zero-Adjustment with pressing CLEAR button
      Data spec. Data transfer ASCII fomat (Baud rate :19200)
      Data memory 800 data
      Power supply Ni-Cd chargeable battery 1.2V×5cells  700mAh
      Auto power save 10 minutes no use, automatically switch off.
      Charging time about 3 hours
      Continunous working time 12 hours
      Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
      Weight Meter part    520g
      Code length Standard 1m (there are automatic machines no less than 4m as an option.)
      Accessories  (one piece each)
      AC/DC adaptor
      An inspection report, a proofreading certificate, a traceability system figure

      Detection machine size figure
      Detection machine outside figure
      Form IP05/5 IP50 IP200 IP500 Detector
      Φ40 Φ50 Φ60 Φ80
      41.2 63 73 99
      5 10 10 15.5
      Φ60 Φ90 Φ110 Φ140
      Φ50 Φ74 Φ90 Φ116
      (Three division) Φ4.2 Φ6.3 Φ8.3 Φ10.5
      G (Socket intuition affinity) 6.35sq 9.5sq 12.7sq 19sq
      weight 189g 632g 1.8kg 3kg

      DIS-IP05日本CEDAR扭力測試儀

      TORQUE TESTER  DIS-IP series
      Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible.  (A Measurement mode and a unit. Other coded data is displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort and Detector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspection and management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision  □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time (every about 1/180 seconds).  □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up.   It is very convenient for a continuous check. □The operation torque of a QL type and pre set type wrench driver can read measured value correctly in peak down mode (P-D).
      Specification DIS-IP05 DIS-IP5 DIS-IP50 DIS-IP200 DIS-IP500
      Measuring range (at  time of Track) 2.0~500 mN?m 0.30~50 kgf?cm 0.30~45 lbf?in
      0.030~5 N?m 0.30~50 kgf?cm 0.30~45 lbf?in
      030~50 N?m 3.0~500 kgf?cm 3.0~450 lbf?in
      3.0~200 N?m 30~2000 kgf?cm 30~1740 lbf?in
      3.0~500 N?m 30~5000 kgf?cm 30~4500 lbf?in
      Accuracy ±0.5%     (499 or less digit±3digit)
      Display The 4 figures digital display of LCD
      The measurement direction CW-CCW (right and left)
      Measuring mode P-P  Peak Peak load value hold.
      T-R  Track Indication of real time torque value.
      P-D  Peak down Holding Load Value at the moment to change from upward to downword
      C Real-time output Load torque value is outputted every about1/ 180 second .
      Decision function Setting of torque value A Maximum and a minimum value are in a measuring range, and a setup is possible. Can confirm the set value by the buzzer sound or LED.
      The Maximum, the minimum, and the average value Displays, memory and output the data number, the maximum, the minimum, and the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
      Automatic Clearance Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
      One-touch zero Easy Zero-Adjustment with pressing CLEAR button
      Data spec. Data transfer ASCII fomat (Baud rate :19200)
      Data memory 800 data
      Power supply Ni-Cd chargeable battery 1.2V×5cells  700mAh
      Auto power save 10 minutes no use, automatically switch off.
      Charging time about 3 hours
      Continunous working time 12 hours
      Meter outside type dimension 100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
      Weight Meter part    520g
      Code length Standard 1m (there are automatic machines no less than 4m as an option.)
      Accessories  (one piece each)
      AC/DC adaptor
      An inspection report, a proofreading certificate, a traceability system figure

      Detection machine size figure
      Detection machine outside figure
      Form IP05/5 IP50 IP200 IP500 Detector
      Φ40 Φ50 Φ60 Φ80
      41.2 63 73 99
      5 10 10 15.5
      Φ60 Φ90 Φ110 Φ140
      Φ50 Φ74 Φ90 Φ116
      (Three division) Φ4.2 Φ6.3 Φ8.3 Φ10.5
      G (Socket intuition affinity) 6.35sq 9.5sq 12.7sq 19sq
      weight 189g 632g 1.8kg 3kg

      最新產(chǎn)品

      熱門儀器: 液相色譜儀 氣相色譜儀 原子熒光光譜儀 可見分光光度計 液質(zhì)聯(lián)用儀 壓力試驗機 酸度計(PH計) 離心機 高速離心機 冷凍離心機 生物顯微鏡 金相顯微鏡 標準物質(zhì) 生物試劑
      亚洲阿v天堂在线观看2019,97免费人妻视在线视频,成人网站不卡在线观看,亚洲成av人电影在线无码
      <legend id="dnf07"></legend>
        • <tr id="dnf07"><dfn id="dnf07"></dfn></tr>

          <dl id="dnf07"><label id="dnf07"></label></dl>