DIS-IP500CEDAR扭力測試儀
| TORQUE TESTER DIS-IP series |
 |
| Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. （A Measurement mode ａnd a unit. Other coded data is displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）. □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）. |
| Specification | DIS-IP05 | ＤIS-ＩＰ5 | ＤIS-ＩＰ50 | ＤIS-ＩＰ200 | ＤIS-ＩＰ500 | |
| Measuring range （at time of Track） | 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in | 0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in | 030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in | 3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in | 3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in | |
| Accuracy | ±0.5% （499 or less digit±3digit） | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW （right ａnd left） | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second . | |||||
| Decision function | Setting of torque value | A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum, ａnd the average value | Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| Automatic Clearance | Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance | |||||
| One-touch zero | Easy Zero-Adjustment with pressing CLEAR button | |||||
| Data spec. | Data transfer | ASCII fomat （Baud rate :19200） | ||||
| Data memory | 800 data | |||||
| Power supply | Ni-Cd chargeable battery 1.2V×5cells 700mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3 hours | |||||
| Continunous working time | 12 hours | |||||
| Meter outside type dimension | 100（W） x105（D） x33 （H） （It does not contain by the projection thing.） | |||||
| Weight | Meter part 520g | |||||
| Code length | Standard 1m （there are automatic machines no less than 4m as an option.） | |||||
| Accessories （one piece each） | AC/DC adaptor | |||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
| Detection machine size figure | Detection machine outside figure | ||||
| Form | IP05/5 | IP50 | IP200 | IP500 |  |
| Ａ | Φ40 | Φ50 | Φ60 | Φ80 | |
| Ｂ | 41.2 | 63 | 73 | 99 | |
| Ｃ | 5 | 10 | 10 | 15.5 | |
| Ｄ | Φ60 | Φ90 | Φ110 | Φ140 | |
| Ｅ | Φ50 | Φ74 | Φ90 | Φ116 | |
| Ｆ（Three division） | Φ4.2 | Φ6.3 | Φ8.3 | Φ10.5 | |
| Ｇ （Socket intuition affinity） | 6.35ｓｑ | 9.5ｓｑ | 12.7ｓｑ | 19ｓｑ | |
| weight | 189ｇ | 632ｇ | 1.8ｋｇ | 3ｋｇ | |
DIS-IP200CEDAR扭力測試儀
| TORQUE TESTER DIS-IP series |
|
| Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. （A Measurement mode ａnd a unit. Other coded data is displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）. □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）. |
| Specification | DIS-IP05 | ＤIS-ＩＰ5 | ＤIS-ＩＰ50 | ＤIS-ＩＰ200 | ＤIS-ＩＰ500 | |
| Measuring range （at time of Track） | 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in | 0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in | 030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in | 3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in | 3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in | |
| Accuracy | ±0.5% （499 or less digit±3digit） | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW （right ａnd left） | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second . | |||||
| Decision function | Setting of torque value | A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum, ａnd the average value | Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| Automatic Clearance | Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance | |||||
| One-touch zero | Easy Zero-Adjustment with pressing CLEAR button | |||||
| Data spec. | Data transfer | ASCII fomat （Baud rate :19200） | ||||
| Data memory | 800 data | |||||
| Power supply | Ni-Cd chargeable battery 1.2V×5cells 700mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3 hours | |||||
| Continunous working time | 12 hours | |||||
| Meter outside type dimension | 100（W） x105（D） x33 （H） （It does not contain by the projection thing.） | |||||
| Weight | Meter part 520g | |||||
| Code length | Standard 1m （there are automatic machines no less than 4m as an option.） | |||||
| Accessories （one piece each） | AC/DC adaptor | |||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
| Detection machine size figure | Detection machine outside figure | ||||
| Form | IP05/5 | IP50 | IP200 | IP500 | |
| Ａ | Φ40 | Φ50 | Φ60 | Φ80 | |
| Ｂ | 41.2 | 63 | 73 | 99 | |
| Ｃ | 5 | 10 | 10 | 15.5 | |
| Ｄ | Φ60 | Φ90 | Φ110 | Φ140 | |
| Ｅ | Φ50 | Φ74 | Φ90 | Φ116 | |
| Ｆ（Three division） | Φ4.2 | Φ6.3 | Φ8.3 | Φ10.5 | |
| Ｇ （Socket intuition affinity） | 6.35ｓｑ | 9.5ｓｑ | 12.7ｓｑ | 19ｓｑ | |
| weight | 189ｇ | 632ｇ | 1.8ｋｇ | 3ｋｇ | |
DIS-IP50CEDAR扭力測試儀
| TORQUE TESTER DIS-IP series |
|
| Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. （A Measurement mode ａnd a unit. Other coded data is displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）. □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）. |
| Specification | DIS-IP05 | ＤIS-ＩＰ5 | ＤIS-ＩＰ50 | ＤIS-ＩＰ200 | ＤIS-ＩＰ500 | |
| Measuring range （at time of Track） | 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in | 0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in | 030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in | 3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in | 3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in | |
| Accuracy | ±0.5% （499 or less digit±3digit） | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW （right ａnd left） | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second . | |||||
| Decision function | Setting of torque value | A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum, ａnd the average value | Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| Automatic Clearance | Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance | |||||
| One-touch zero | Easy Zero-Adjustment with pressing CLEAR button | |||||
| Data spec. | Data transfer | ASCII fomat （Baud rate :19200） | ||||
| Data memory | 800 data | |||||
| Power supply | Ni-Cd chargeable battery 1.2V×5cells 700mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3 hours | |||||
| Continunous working time | 12 hours | |||||
| Meter outside type dimension | 100（W） x105（D） x33 （H） （It does not contain by the projection thing.） | |||||
| Weight | Meter part 520g | |||||
| Code length | Standard 1m （there are automatic machines no less than 4m as an option.） | |||||
| Accessories （one piece each） | AC/DC adaptor | |||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
| Detection machine size figure | Detection machine outside figure | ||||
| Form | IP05/5 | IP50 | IP200 | IP500 | |
| Ａ | Φ40 | Φ50 | Φ60 | Φ80 | |
| Ｂ | 41.2 | 63 | 73 | 99 | |
| Ｃ | 5 | 10 | 10 | 15.5 | |
| Ｄ | Φ60 | Φ90 | Φ110 | Φ140 | |
| Ｅ | Φ50 | Φ74 | Φ90 | Φ116 | |
| Ｆ（Three division） | Φ4.2 | Φ6.3 | Φ8.3 | Φ10.5 | |
| Ｇ （Socket intuition affinity） | 6.35ｓｑ | 9.5ｓｑ | 12.7ｓｑ | 19ｓｑ | |
| weight | 189ｇ | 632ｇ | 1.8ｋｇ | 3ｋｇ | |
DIS-IP5CEDAR扭力測試儀
| TORQUE TESTER DIS-IP series |
|
| Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. （A Measurement mode ａnd a unit. Other coded data is displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）. □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）. |
| Specification | DIS-IP05 | ＤIS-ＩＰ5 | ＤIS-ＩＰ50 | ＤIS-ＩＰ200 | ＤIS-ＩＰ500 | |
| Measuring range （at time of Track） | 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in | 0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in | 030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in | 3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in | 3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in | |
| Accuracy | ±0.5% （499 or less digit±3digit） | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW （right ａnd left） | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second . | |||||
| Decision function | Setting of torque value | A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum, ａnd the average value | Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| Automatic Clearance | Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance | |||||
| One-touch zero | Easy Zero-Adjustment with pressing CLEAR button | |||||
| Data spec. | Data transfer | ASCII fomat （Baud rate :19200） | ||||
| Data memory | 800 data | |||||
| Power supply | Ni-Cd chargeable battery 1.2V×5cells 700mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3 hours | |||||
| Continunous working time | 12 hours | |||||
| Meter outside type dimension | 100（W） x105（D） x33 （H） （It does not contain by the projection thing.） | |||||
| Weight | Meter part 520g | |||||
| Code length | Standard 1m （there are automatic machines no less than 4m as an option.） | |||||
| Accessories （one piece each） | AC/DC adaptor | |||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
| Detection machine size figure | Detection machine outside figure | ||||
| Form | IP05/5 | IP50 | IP200 | IP500 | |
| Ａ | Φ40 | Φ50 | Φ60 | Φ80 | |
| Ｂ | 41.2 | 63 | 73 | 99 | |
| Ｃ | 5 | 10 | 10 | 15.5 | |
| Ｄ | Φ60 | Φ90 | Φ110 | Φ140 | |
| Ｅ | Φ50 | Φ74 | Φ90 | Φ116 | |
| Ｆ（Three division） | Φ4.2 | Φ6.3 | Φ8.3 | Φ10.5 | |
| Ｇ （Socket intuition affinity） | 6.35ｓｑ | 9.5ｓｑ | 12.7ｓｑ | 19ｓｑ | |
| weight | 189ｇ | 632ｇ | 1.8ｋｇ | 3ｋｇ | |
DIS-IP05CEDAR扭力測試儀
| TORQUE TESTER DIS-IP series |
|
| Management of various torque wrench torque drivers A new function is carried （1） Display Board Became Legible. （A Measurement mode ａnd a unit. Other coded data is displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. Indicatort ａnd Detector dissociate. Easy to install to small space. Torque wrench（pre set type）,Torque driver,etc. It stands to inspection ａnd management of a torque tool as a standard machine in the company at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features □ Yes-no decision □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time （every about 1/180 seconds）. □ USB terminal data output □It is a rechargeable battery drive, the installation to the spot is also easy. □By the auto power OFF, It prevents forgetting to turn off the power. □One-touch zero adjustment □An auto clearance （0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec） can be set up. It is very convenient for a continuous check. □The operation torque of a QL type ａnd pre set type wrench driver can read measured value correctly in peak down mode （P-D）. |
| Specification | DIS-IP05 | ＤIS-ＩＰ5 | ＤIS-ＩＰ50 | ＤIS-ＩＰ200 | ＤIS-ＩＰ500 | |
| Measuring range （at time of Track） | 2.0～500 mN?m 0.30～50 kgf?cm 0.30～45 lbf?in | 0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in | 030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in | 3.0～200 N?m 30～2000 kgf?cm 30～1740 lbf?in | 3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in | |
| Accuracy | ±0.5% （499 or less digit±3digit） | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW （right ａnd left） | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second . | |||||
| Decision function | Setting of torque value | A Maximum ａnd a minimum value are in a measuring range, ａnd a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum, ａnd the average value | Displays, memory ａnd output the data number, the maximum, the minimum, ａnd the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| Automatic Clearance | Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance | |||||
| One-touch zero | Easy Zero-Adjustment with pressing CLEAR button | |||||
| Data spec. | Data transfer | ASCII fomat （Baud rate :19200） | ||||
| Data memory | 800 data | |||||
| Power supply | Ni-Cd chargeable battery 1.2V×5cells 700mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3 hours | |||||
| Continunous working time | 12 hours | |||||
| Meter outside type dimension | 100（W） x105（D） x33 （H） （It does not contain by the projection thing.） | |||||
| Weight | Meter part 520g | |||||
| Code length | Standard 1m （there are automatic machines no less than 4m as an option.） | |||||
| Accessories （one piece each） | AC/DC adaptor | |||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
| Detection machine size figure | Detection machine outside figure | ||||
| Form | IP05/5 | IP50 | IP200 | IP500 | |
| Ａ | Φ40 | Φ50 | Φ60 | Φ80 | |
| Ｂ | 41.2 | 63 | 73 | 99 | |
| Ｃ | 5 | 10 | 10 | 15.5 | |
| Ｄ | Φ60 | Φ90 | Φ110 | Φ140 | |
| Ｅ | Φ50 | Φ74 | Φ90 | Φ116 | |
| Ｆ（Three division） | Φ4.2 | Φ6.3 | Φ8.3 | Φ10.5 | |
| Ｇ （Socket intuition affinity） | 6.35ｓｑ | 9.5ｓｑ | 12.7ｓｑ | 19ｓｑ | |
| weight | 189ｇ | 632ｇ | 1.8ｋｇ | 3ｋｇ | |
DI-1M-IP500CEDAR扭力測試儀
| Management of air tool / oil pulse tool |
| ●Torque Tester DI-1M-IP series |
 |
| Management of an oil pulse tool etc. High precision ａnd lightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweight ａnd small, it can install in a work line. Convenient for the scheduled inspection of a tool It is bright ａnd readable at an LED display. The high luminosity （light emitting diode） LED can be adopted as a display element, and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features □Blow counter. The total number of blows within fixed time ａnd torque measured value are displayed. □ Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. □RS232C Output. It connects with data printing （printer use corresponding to RS232C）, ａnd a personal computer, ａnd data can be saved easily.（Taking-in soft use of exclusive use） □ It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc. |
| Specification | ＤＩ-１Ｍ-ＩＰ５０ | ＤＩ-１Ｍ-ＩＰ２００ | ＤＩ-１Ｍ-ＩＰ５００ | |
| Measuring range （at the time of Track） | 0.30～50 N?m 3.0～500 kgf?cm 3.0～430 lbf?in | 3.0～200 N?m 30～2000 kgf?cm 30～1800 lbf?in | 3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in | |
| Peak down Operating range | 0.70N?m～, 7.0kgf?cm/ lbf?in～ | 7.0N?m～, 70kgf?cm/ lbf?in～ | ||
| Accuracy | ±0.5％（F/S）（499 or less digit±3digit） | |||
| Display | The 4 figures digital display of LED | |||
| The measurement direction | CW-CCW （right ａnd left） | |||
| Measuring mode | P-P Peak | Peak load value hold | ||
| T-R Track | Indication of real time torque value. | |||
| P-D Peak down | Indication peak down point ａnd hold. | |||
| Display zero clearance | Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance | |||
| Blow | Measurement range | Zero to 99 blow | ||
| Measurement time | 0.1 - 9.9 seconds | |||
| Data output | RS232C conformity （baud rate 9600） | |||
| Power supply | Ni-Cd chargeable battery 1.2V×5cells 700mAh | |||
| Auto power save | 5 minutes no use, automatically switch off. | |||
| Charging time | From empty - less than 6hours | |||
| Continunous working time | 8 hours | |||
| Meter part Weight | About 600g | |||
| Detection part Weight | about 600g | about 1kg | about 2.5kg | |
| Meter part Outside size | 146（W）×115（D）×48（H） （It does not contain by the projection part） | |||
| Code length | Standard 1m （there are automatic machines no less than 4m as an option.） | |||
| Accessories （one piece each） | Attache case | ― | ― | |
| AC/DC adaptor （Please choose AC adaptor out of 120V, ａnd 230V.） | ||||
| An inspection report, a proofreading certificate, traceability system figure | ||||
| Detection machine size figure | Detection machine outside figure | |||
| Form | ＩＰ５０ | ＩＰ２００ | ＩＰ５００ | |
| Ａ | Φ50 | Φ60 | Φ80 | |
| Ｂ | 63 | 73 | 99 | |
| Ｃ | 10 | 10 | 15.5 | |
| Ｄ | Φ90 | Φ110 | Φ140 | |
| Ｅ | Φ74 | Φ90 | Φ116 | |
| Ｆ（Three division） | Φ6.3 | Φ8.3 | Φ10.5 | |
| Ｇ （Socket intuition affinity） | 9.5ｓｑ | 12.7ｓｑ | 19ｓｑ | |
| Weight | 632g | 1.8kg | 3kg | |
DI-1M-IP50CEDAR扭力測試儀
| Management of air tool / oil pulse tool |
| ●Torque Tester DI-1M-IP series |
|
| Management of an oil pulse tool etc. High precision ａnd lightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweight ａnd small, it can install in a work line. Convenient for the scheduled inspection of a tool It is bright ａnd readable at an LED display. The high luminosity （light emitting diode） LED can be adopted as a display element, and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features □Blow counter. The total number of blows within fixed time ａnd torque measured value are displayed. □ Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. □RS232C Output. It connects with data printing （printer use corresponding to RS232C）, ａnd a personal computer, ａnd data can be saved easily.（Taking-in soft use of exclusive use） □ It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc. |
| Specification | ＤＩ-１Ｍ-ＩＰ５０ | ＤＩ-１Ｍ-ＩＰ２００ | ＤＩ-１Ｍ-ＩＰ５００ | |
| Measuring range （at the time of Track） | 0.30～50 N?m 3.0～500 kgf?cm 3.0～430 lbf?in | 3.0～200 N?m 30～2000 kgf?cm 30～1800 lbf?in | 3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in | |
| Peak down Operating range | 0.70N?m～, 7.0kgf?cm/ lbf?in～ | 7.0N?m～, 70kgf?cm/ lbf?in～ | ||
| Accuracy | ±0.5％（F/S）（499 or less digit±3digit） | |||
| Display | The 4 figures digital display of LED | |||
| The measurement direction | CW-CCW （right ａnd left） | |||
| Measuring mode | P-P Peak | Peak load value hold | ||
| T-R Track | Indication of real time torque value. | |||
| P-D Peak down | Indication peak down point ａnd hold. | |||
| Display zero clearance | Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance | |||
| Blow | Measurement range | Zero to 99 blow | ||
| Measurement time | 0.1 - 9.9 seconds | |||
| Data output | RS232C conformity （baud rate 9600） | |||
| Power supply | Ni-Cd chargeable battery 1.2V×5cells 700mAh | |||
| Auto power save | 5 minutes no use, automatically switch off. | |||
| Charging time | From empty - less than 6hours | |||
| Continunous working time | 8 hours | |||
| Meter part Weight | About 600g | |||
| Detection part Weight | about 600g | about 1kg | about 2.5kg | |
| Meter part Outside size | 146（W）×115（D）×48（H） （It does not contain by the projection part） | |||
| Code length | Standard 1m （there are automatic machines no less than 4m as an option.） | |||
| Accessories （one piece each） | Attache case | ― | ― | |
| AC/DC adaptor （Please choose AC adaptor out of 120V, ａnd 230V.） | ||||
| An inspection report, a proofreading certificate, traceability system figure | ||||
| Detection machine size figure | Detection machine outside figure | |||
| Form | ＩＰ５０ | ＩＰ２００ | ＩＰ５００ | |
| Ａ | Φ50 | Φ60 | Φ80 | |
| Ｂ | 63 | 73 | 99 | |
| Ｃ | 10 | 10 | 15.5 | |
| Ｄ | Φ90 | Φ110 | Φ140 | |
| Ｅ | Φ74 | Φ90 | Φ116 | |
| Ｆ（Three division） | Φ6.3 | Φ8.3 | Φ10.5 | |
| Ｇ （Socket intuition affinity） | 9.5ｓｑ | 12.7ｓｑ | 19ｓｑ | |
| Weight | 632g | 1.8kg | 3kg | |
DI-1M-IP200CEDAR扭力測試儀
| Management of air tool / oil pulse tool |
| ●Torque Tester DI-1M-IP series |
|
| Management of an oil pulse tool etc. High precision ａnd lightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweight ａnd small, it can install in a work line. Convenient for the scheduled inspection of a tool It is bright ａnd readable at an LED display. The high luminosity （light emitting diode） LED can be adopted as a display element, and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features □Blow counter. The total number of blows within fixed time ａnd torque measured value are displayed. □ Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. □RS232C Output. It connects with data printing （printer use corresponding to RS232C）, ａnd a personal computer, ａnd data can be saved easily.（Taking-in soft use of exclusive use） □ It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc. |
| Specification | ＤＩ-１Ｍ-ＩＰ５０ | ＤＩ-１Ｍ-ＩＰ２００ | ＤＩ-１Ｍ-ＩＰ５００ | |
| Measuring range （at the time of Track） | 0.30～50 N?m 3.0～500 kgf?cm 3.0～430 lbf?in | 3.0～200 N?m 30～2000 kgf?cm 30～1800 lbf?in | 3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in | |
| Peak down Operating range | 0.70N?m～, 7.0kgf?cm/ lbf?in～ | 7.0N?m～, 70kgf?cm/ lbf?in～ | ||
| Accuracy | ±0.5％（F/S）（499 or less digit±3digit） | |||
| Display | The 4 figures digital display of LED | |||
| The measurement direction | CW-CCW （right ａnd left） | |||
| Measuring mode | P-P Peak | Peak load value hold | ||
| T-R Track | Indication of real time torque value. | |||
| P-D Peak down | Indication peak down point ａnd hold. | |||
| Display zero clearance | Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance | |||
| Blow | Measurement range | Zero to 99 blow | ||
| Measurement time | 0.1 - 9.9 seconds | |||
| Data output | RS232C conformity （baud rate 9600） | |||
| Power supply | Ni-Cd chargeable battery 1.2V×5cells 700mAh | |||
| Auto power save | 5 minutes no use, automatically switch off. | |||
| Charging time | From empty - less than 6hours | |||
| Continunous working time | 8 hours | |||
| Meter part Weight | About 600g | |||
| Detection part Weight | about 600g | about 1kg | about 2.5kg | |
| Meter part Outside size | 146（W）×115（D）×48（H） （It does not contain by the projection part） | |||
| Code length | Standard 1m （there are automatic machines no less than 4m as an option.） | |||
| Accessories （one piece each） | Attache case | ― | ― | |
| AC/DC adaptor （Please choose AC adaptor out of 120V, ａnd 230V.） | ||||
| An inspection report, a proofreading certificate, traceability system figure | ||||
| Detection machine size figure | Detection machine outside figure | |||
| Form | ＩＰ５０ | ＩＰ２００ | ＩＰ５００ | |
| Ａ | Φ50 | Φ60 | Φ80 | |
| Ｂ | 63 | 73 | 99 | |
| Ｃ | 10 | 10 | 15.5 | |
| Ｄ | Φ90 | Φ110 | Φ140 | |
| Ｅ | Φ74 | Φ90 | Φ116 | |
| Ｆ（Three division） | Φ6.3 | Φ8.3 | Φ10.5 | |
| Ｇ （Socket intuition affinity） | 9.5ｓｑ | 12.7ｓｑ | 19ｓｑ | |
| Weight | 632g | 1.8kg | 3kg | |
DI-9M-8CEDAR扭力測試儀
| DI-9 series is most suitable for checking ａnd controlling the torque of Electric Screwdriver ａnd Torque Driver. |
| upgrade The main changed parts （1） In a display board, "measurement mode", a "measurement unit", "the maximum, the minimum, an average, etc.", etc. display. （2） Change of Measurement Unit Can be Performed N-m <=> kgf-cm <=>lbf-in Etc. （3） Setup of Various Numerical Values Can be Easy ａnd Can Carry Out Speedily. （4） Calculation of Maximum, Minimum, ａnd Average Became Intelligible. （5） The call of the saved data became easy. The output of data also became intelligible. （6） Fault charge protection. It is pilot-lamp lighting during charge. （7） Data Output is USB Form （B Type）. （8） Memory Data are 800 Affairs （9） Real-time Output is Every 1 / 180 Seconds. |
 |
  |
| The best for everyday check of an electric driver Wide measurement range （0 - 8000digit）, it corresponds to various set torques Can measure without inversion/ rolling-back work efficiently by OW joint （PAT.P）. |
| Specification | DI-9M-8 | DI-9M-08 | |
| Measuring range | 0.020-8 N?m | 2.0-800 mN?m | |
| 0.20～80 kgf?cm | 0.020～8 kgf?cm | ||
| 0.20～70 lbf?in | 0.020～7 lbf?in | ||
| Accuracy | ±0.5% （499 digit or less ±3digit） | ||
| Display | The 4 figures digital display of LCD | ||
| The measurement direction | CW-CCW （right ａnd left） | ||
| Zero return by one touch | Return to zero by pressing clear button. | ||
| Measurement Mode | Track , P-P（peak to peak） , P-D（Peak-Down） , C（Real-time Output） | ||
| High ａnd low limits judging function | High ａnd low value are measurement within the limits, ａnd can be set up. | ||
| Real-time Output | Load torque value is outputted every about1/ 180 second. | ||
| The Maximum, the minimum, ａnd the average value display | The maximum, the minimum, average value, ａnd the data number of 30 data are displayed.It saves to ten channels. | ||
| Data Output | ASCII format （baud rate 19200） | ||
| Auto power save | 10 minutes no use, automatically switch off. | ||
| Power supply | Ni-Cd chargeable battery 1.2V × 5cells 700mAh | ||
| Charging time | About 3hours | ||
| Continuous working time | About 12hours | ||
| clearance | It is a display clearance in set-up time. （0.1 - 3.0 sec） | ||
| Socket size | □ 20mm/ □9.5mm | ||
| Dimension / Weight | W:160×D:125×H:55 / About 1kg | ||
| Recommend buffer accessories | Measuring joint OW-20/OW-60 | Measuring joint OW-025/OW-10 | |
| Cube （with a 5th page screw hole） 20x20x20 。∕2.6/M3/M4/M5/M6 Tap processing） | |||
| AC/DC adaptor | |||
| Exclusive receipt case | |||
| An inspection report, a proofreading certificate, a traceability system figure | |||
※Do not use for measurement of impact tool.Do not apply more than the specified torque.
| ● MEASURING JOINT OW series | |
 | Since our company developed the buffer with little influence of fricative, stable measurement could be performed Moreover ,it does not need to reverse-rotate at the time of measurement, ａnd work efficiency improved. |
| Specification | Type | ||||
| OW-025 | OW-10 | OW-20 | OW-60 | ||
| Measuring range N?m | 0.25 | 1 | 2 | 6 | |
| Mechanical life （times） | 10,000 | 8,000 | 5,000 | 5,000 | |
| Outer diameter size （mm） | Bit engagement part （screw part） | M2.6 cross recess screw | M3 cross recess screw | M4 cross recess screw | M6 cross recess screw |
| The standard screw is cross recess screw but they may be altered as necessary | |||||
| Outside diameter | φ28 | φ32 | φ32 | φ38 | |
| Height | 44 | 51 | 51 | 69 | |
| Ｉnstallation | 20square ×4（t） | ||||
DI-1M-IP50CEDAR扭力測試儀
| Management of air tool / oil pulse tool |
| ●Torque Tester DI-1M-IP series |
|
| Management of an oil pulse tool etc. High precision ａnd lightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweight ａnd small, it can install in a work line. Convenient for the scheduled inspection of a tool It is bright ａnd readable at an LED display. The high luminosity （light emitting diode） LED can be adopted as a display element, and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features □Blow counter. The total number of blows within fixed time ａnd torque measured value are displayed. □ Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. □RS232C Output. It connects with data printing （printer use corresponding to RS232C）, ａnd a personal computer, ａnd data can be saved easily.（Taking-in soft use of exclusive use） □ It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc. |
| Specification | ＤＩ-１Ｍ-ＩＰ５０ | ＤＩ-１Ｍ-ＩＰ２００ | ＤＩ-１Ｍ-ＩＰ５００ | |
| Measuring range （at the time of Track） | 0.30～50 N?m 3.0～500 kgf?cm 3.0～430 lbf?in | 3.0～200 N?m 30～2000 kgf?cm 30～1800 lbf?in | 3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in | |
| Peak down Operating range | 0.70N?m～, 7.0kgf?cm/ lbf?in～ | 7.0N?m～, 70kgf?cm/ lbf?in～ | ||
| Accuracy | ±0.5％（F/S）（499 or less digit±3digit） | |||
| Display | The 4 figures digital display of LED | |||
| The measurement direction | CW-CCW （right ａnd left） | |||
| Measuring mode | P-P Peak | Peak load value hold | ||
| T-R Track | Indication of real time torque value. | |||
| P-D Peak down | Indication peak down point ａnd hold. | |||
| Display zero clearance | Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance | |||
| Blow | Measurement range | Zero to 99 blow | ||
| Measurement time | 0.1 - 9.9 seconds | |||
| Data output | RS232C conformity （baud rate 9600） | |||
| Power supply | Ni-Cd chargeable battery 1.2V×5cells 700mAh | |||
| Auto power save | 5 minutes no use, automatically switch off. | |||
| Charging time | From empty - less than 6hours | |||
| Continunous working time | 8 hours | |||
| Meter part Weight | About 600g | |||
| Detection part Weight | about 600g | about 1kg | about 2.5kg | |
| Meter part Outside size | 146（W）×115（D）×48（H） （It does not contain by the projection part） | |||
| Code length | Standard 1m （there are automatic machines no less than 4m as an option.） | |||
| Accessories （one piece each） | Attache case | ― | ― | |
| AC/DC adaptor （Please choose AC adaptor out of 120V, ａnd 230V.） | ||||
| An inspection report, a proofreading certificate, traceability system figure | ||||
| Detection machine size figure | Detection machine outside figure | |||
| Form | ＩＰ５０ | ＩＰ２００ | ＩＰ５００ | |
| Ａ | Φ50 | Φ60 | Φ80 | |
| Ｂ | 63 | 73 | 99 | |
| Ｃ | 10 | 10 | 15.5 | |
| Ｄ | Φ90 | Φ110 | Φ140 | |
| Ｅ | Φ74 | Φ90 | Φ116 | |
| Ｆ（Three division） | Φ6.3 | Φ8.3 | Φ10.5 | |
| Ｇ （Socket intuition affinity） | 9.5ｓｑ | 12.7ｓｑ | 19ｓｑ | |
| Weight | 632g | 1.8kg | 3kg | |
最新產品
- 橡膠高低溫抗拉伸力強度試驗機 2024/11/24 14:41:42
- 中心血站冰凍血漿水浴解凍箱 2024/11/24 14:33:52
- 血站冰凍血制品解凍箱 2024/11/24 14:33:25
- CMC-185-MX成都軟起動經銷MCD201-110-T4-CV3 SSD-55KW ATS22C25Q XYR6-37KW 2024/11/24 14:31:27
- 冰凍血制品恒溫解凍箱 2024/11/24 14:30:42
- 隔水式恒溫血漿解凍箱 2024/11/24 14:30:13
- 輸血科冰凍血漿解凍儀 2024/11/24 14:29:31
- 醫用冰凍血制品解凍儀 2024/11/24 14:28:47
- 水浴式血制品血漿解凍箱 2024/11/24 14:27:29
- 臺式血漿解凍箱 2024/11/24 14:27:07
- 循環水式血漿解凍箱 2024/11/24 14:26:12
- 血液科血液制品血漿解凍箱 2024/11/24 14:25:43
- 發布動態/抗檢測原料/ 抗檢測抗115項抗檢測原粉@報價已更新 2024/11/24 13:45:34
- 發布動態/強力v1/抗檢測強力v1/高品質原料@產品價格 2024/11/24 13:44:18
- 發布動態/鹽酸達泊西汀/達泊西丁原料@產品價格 2024/11/24 13:43:06
- 發布動態/無水茶堿/茶葉提取物/茶堿/茶堿原料/動態已更新 2024/11/24 13:41:57
- 發布動態/奧利司他/奧利司他原料@產品價格 2024/11/24 13:40:39
- 發布動態/他達那非/他達那非原料/產品價格 2024/11/24 13:39:29
- 發布動態/育亨賓/鹽酸育亨賓原料@產品價格 2024/11/24 13:38:17
- 發布動態/無水茶堿/茶葉提取物/茶堿/茶堿原料/已更新報價 2024/11/24 13:37:08
- 發布動態/西地那非/西地那非原粉/西地原料/產品價格 2024/11/24 13:35:47
- 發布動態/金陽堿/金陽堿原料@產品價格 2024/11/24 13:34:37
- 發布動態/抗檢測原料/ 抗檢測抗115項抗檢測原粉@產品價格 2024/11/24 13:33:36
- 發布動態/強力v1/抗檢測強力v1/高品質原料@動態播報 2024/11/24 13:32:23
- 發布動態/鹽酸達泊西汀/達泊西丁原料@動態播報 2024/11/24 13:31:19
- 發布動態/無水茶堿/茶葉提取物/茶堿/茶堿原料/產品功能 2024/11/24 13:29:38
- 發布動態/奧利司他/奧利司他原料@動態播報 2024/11/24 13:28:05
- 發布動態/他達那非/他達那非原料/動態播報 2024/11/24 13:27:05
- 發布動態/育亨賓/鹽酸育亨賓原料@動態播報 2024/11/24 13:25:57
- 發布動態/無水茶堿/茶葉提取物/茶堿/茶堿原料/動態播報 2024/11/24 13:24:48