增力電動攪拌器是化工、冶金、紡織、環保、醫藥衛生和大專院校的實驗室。分析室的必備工具。產品特點
1、設有機械定時,無級調速,運行平衡,LED顯示、準確、直觀。
2、攪拌棒采用不銹鋼材質、具有優越的抗腐蝕能力(聚四氟攪拌棒可選配)
3、對高粘度的液體進行精密攪拌。參數規格
增力電動攪拌器 | |||||
型 號 | JJ-1A/40W | JJ-1A/60W | JJ-1A/100W | JJ-1A/160W | JJ-1A/200W | 啟動~2500r/min | 定時范圍常開或0~120min |
攪拌功率 | 40W | 60W | 100W | 160W | 200W | 220V±10℅ 50Hz±1Hz |
注:帶“A”為速度顯示,以實物為準,可根據客戶要求定做
用途概述:
增力電動攪拌器是化工、冶金、紡織、環保、醫藥衛生和大專院校的實驗室。分析室的必備工具。
產品特點:
1、設有機械定時,無級調速,運行平衡,LED顯示、準確、直觀。
2、攪拌棒采用不銹鋼材質、具有優越的抗腐蝕能力(聚四氟攪拌棒可選配)
3、對高粘度的液體進行精密攪拌。
基本參數:
增力電動攪拌器 | |||||
型 號 | JJ-1A/40W | JJ-1A/60W | JJ-1A/100W | JJ-1A/160W | JJ-1A/200W | 啟動~2500r/min | 定時范圍常開或0~120min |
攪拌功率 | 40W | 60W | 100W | 160W | 200W | 220V±10℅ 50Hz±1Hz |
注:帶“A”為速度顯示,以實物為準,可根據客戶要求定做
Summary of use:
Powerelectric mixer is chemical, metallurgical, textile, environmental protection,medicine and health care and laboratory of colleges and universities. Anessential tool for analysis room.
Product features:
1,equipped with mechanical timer, stepless speed regulation, running balance.
2,the stir bar is made of stainless steel material, has excellent corrosionresistance (ptfe stir bar is optional),
3,to precision high viscosity liquid mixing.
The basic parameters:
Name | Power electric blender | ||||
Model | JJ-1A/40W | JJ-1A/60W | JJ-1A/100W | JJ-1A/160W | JJ-1A/200W |
Speed range | Start~2500r/min | ||||
Timing range | Normally open or 0 ~ 120 min | ||||
The stirring power | 40W | 60W | 100W | 160W | 200W |
The power supply | 220V±10℅ 50Hz±1Hz |
Note: with "A" for speed display, in kind prevail, can be customized according to customer's requirements
JJ-1A 100W數顯精密增力電動攪拌器的技術指標:
型 號 指 標 | JJ-1A轉速數字顯示 |
電機功率 | 25W 40W 60W 100W 160W 200W 300W |
調速范圍 | 啟動——2500r/min |
定時范圍 | 0—120min常開 |
電 流 | 交流220V 50Hz |
使用維護:
1.正確放置裝液試瓶(或其他器皿)
2.調整、校準攪拌棒在溶液中的工作深度,并裝夾。
3.接通外電源,合上電源開關,指示燈亮。
4.選擇定時,將定時旋鈕調至“定時”或“常開”位置。
5.節調速旋鈕,升至所需轉速。
6.作完畢,將調速旋鈕置于最小位置,定時器置“零”,關電源開關,切斷電源。
7.將攪拌棒擦拭干凈,其上不允許有水滴、污物殘留。
注意事項:
1.JJ-1A帶數顯測試。
2.拌棒放入溶液中,在攪拌過程中如攪拌葉不均勻,因停止,用物品將攪拌葉分勻。
3.如開機后發現攪拌棒轉動不正,停機重新將攪拌棒轉180℃,重新夾緊即可。
4.調速應從低速向高速慢慢啟動。