<legend id="dnf07"></legend>
    • <tr id="dnf07"><dfn id="dnf07"></dfn></tr>

      <dl id="dnf07"><label id="dnf07"></label></dl>
    • CMD55CMD55 CMD55手機綜合測試儀 瑞巨鑫科技 二手儀器

       

      詳細說明:CMD55產品特點:·是測量GSM及GSM1800移動電話的緊縮式單元·通過RS232,IEC/IEEE遠控·前面板有多功能連接器·話音編碼器/可被集成·可選擇安培表和伏特表·高敏感度二級RF輸入·可改進為GSM900、GSM1800及GSM1900測試CharacteristicsThe CMD52 is a compact unit for testing GSM900 mobiles. The CMD55 is furthermore capable of testing GSM1800 (formerly named PCN orDCS1800) and GSM1900 (formerly named PCS or DCS1900) mobile phones. Both models are favourably priced and combine small dimensions with high measurement accuracy and speed.The testers range of capabilities includes all signalling, generator and measurement functions required for verifying the correct operation of the DUT (Device Under Test). Thanks to its fast go/nogo tests and accurate analysis using optional extensions, CMD52 and CMD55 are equally well suited for R&D, production and high-end service and production.Based on the wide-range know-how of Rohde & Schwarz in digital radiocommunication testing, which not least was obtained in developing type-approval test systems such as the GSM900 and GSM1800 system simulators, both CMD models are top-grade testers for present and future measurement applications.Test capabilitiesTo test mobile phones, the CMD simulates a GSM900, 1800 or 1900 base station. One of the two RF synthesizers available for this purpose delivers a continuous BCCH signal while the other one provides all 8 timeslots for TCH signals.The major test functions are:Mobile synchronizationLocation updateIncoming call setupOutgoing call setupMobile power level controlHandover (channel change, timeslot change)Peak power measurementHigh dynamic range burst analyzer (option CMD-B4 and CMD-B42)Spectrum due to Switching measurement (option CMD-B4 and CMD–B43)Spectrum due to Modulation measurement (option CMD-B4 and CMD–B43Timing Advance measurementSACCH measurement (eg RxLev, RxQual, power level)Echo testCall clearing by mobile phoneCall clearing by CMDDC current/voltage measurementsPhase and frequency error measurement (option CMD-B4)Measurement of power ramping as a function of time (option CMD-B4)Bit-error rate (BER) and Fast BER measurement (option CMD-B4)OperationOperation of the CMDis extremely user-friendly and requires no detailed GSM/PCN knowledge. The high-contrast, backlit LCD provided with softkeys on both sides allows convenient callup of test routines under menu control. Various network-specific parameters are preset and permit direct testing without any operator control. In addition, it is of course possible to modify all parameters individually in the configuration menus.AutotestThe autotest function enables complete measurement routines to be started at a keystroke without any further intervention by the operator being required. The test results in tabular form are displayed on the screen.Remote controlThe CMD is remote-controlled via the RS-232 or IEEE/IEC-bus interface using SCPI-compatible commands. In the remote-control mode the CMD is designed for fast speed to yield high throughputs in production.Echo testThe echo test allows very rapid go/nogo analysis covering all essential parts of the mobile. Words spoken into the microphone of the mobile are sent to the CMD, stored in buffer memory and sent back to the phone. In this way it is possible to check the whole signal path from the microphone via the RF transmitter section, RF receiver section, modulator, demodulator, signalling section, speech coder/decoder, analog audio components through to the loudspeaker.Testing handheldsIn addition to the normal RF input/output, the CMD has a high-sensitivity input and a high-level output which enable tests on modules or on handhelds with built-in antenna by using couplers like the CMD-Z10.Module testingFault localization in mobile telephones requires various measurement functions that can also be used without signalling so that defective units can be tested down to modular level. The basic model of CMD already provides some of these functions, eg signal generation with or without modulation or power measurements, other functions being available as optional extensions.
      熱忱期待您的來電洽談。共同合作雙贏!
      另我司同時高價現金“手機綜合測試儀”8960,E5515C,CMU200,GSM,CDMA,WCDMA,TD-SCDMA,E5071C, 8753ES,8720ES,8714ET,E4406A,N4010A藍牙測試儀/GSS4100GPS測試儀 HP8594E,HP8595,HP8596,66311, 66312, 66309, 66319程控電源/手機綜測儀/網絡分析儀/頻譜儀/信號源/示波器/等各類測試儀。
      該公司產品分類: 頻譜分析儀

      CMD55手機綜合測試儀

      CMD55手機綜合測試儀

      東莞市塘廈佳華電子有限公司

      網址http://www.ca-210.com

      聯系人冉(先生) 經理

      聯系手機:  

      電話:0769-87501852

      服務QQ

      郵箱:ranlc.com

       

      產品名稱: CMS55 綜合測試儀

      品  牌: R&S 產品型號: CMS55產品指標: 頻率范圍:2 至 500MHz(0.4 至 1000MHz) 特點輕便型的多功能測試儀器體積小,重量輕。不僅適用于生產線使用,也適用于野外現場測試。采用高對比度的加亮型大屏幕液晶,可同時顯示設定參數和測量結果?蓪各種電臺進行收、發信機測試多種附加測試功能包括:頻譜監視、示波器、連續可調諧失真表和音頻濾波器GSM無線電通信測試儀 CMD55     3/ 2GHz    本公司長期低價銷售!現金回收:租賃:二手進口高擋儀器,網絡分析儀,頻譜分析儀,音頻分析儀,信號源,電橋,電源,同時接收二手高擋儀器維修!

      備注:本公司長期出售/現金收購/回收:網絡分析儀、無線綜合測試儀、頻譜分析儀、視頻音頻分析儀、藍牙測試儀、視頻圖象信號源、LCR測試儀、高低頻信號源、示波器、萬用表、手機程控電源、直流電源、電子負載、頻率計、GPIB卡,PCI-GPIB卡、GPIB-USB-B等二手儀器出售/維修/收購。歡迎來電咨詢!

      該公司產品分類: 設備 回收二手儀器 負載 益和線材測試機 臺灣奧斯達 龍威廠家 綜合測試儀 天饋線測試儀 函數信號發生器 藍牙測試儀 萬用表 二手儀器 微電阻表 功率表 色差計 電橋 電源 頻譜分析儀 網絡分析儀 信號發生器

      最新產品

      熱門儀器: 液相色譜儀 氣相色譜儀 原子熒光光譜儀 可見分光光度計 液質聯用儀 壓力試驗機 酸度計(PH計) 離心機 高速離心機 冷凍離心機 生物顯微鏡 金相顯微鏡 標準物質 生物試劑
      亚洲阿v天堂在线观看2019,97免费人妻视在线视频,成人网站不卡在线观看,亚洲成av人电影在线无码
      <legend id="dnf07"></legend>
        • <tr id="dnf07"><dfn id="dnf07"></dfn></tr>

          <dl id="dnf07"><label id="dnf07"></label></dl>