手持式塵埃粒子計數器 便攜式塵埃粒子計數器 手持式粒子計數儀空氣粒子計數器 CJ-HLC 200A 手持式塵埃粒子計數儀 粒子計數儀 手持式激光粒子計數器
手持式塵埃粒子計數器簡介
CJ-HLC200A手持式塵埃粒子計數器是用于測量潔凈環境中單位體積內塵埃粒子數量和粒徑分布的儀器。手持式塵埃粒子計數器基本原理是光學傳感器的探測激光經塵埃粒子散射后被光敏元件接收并產生脈沖信號,該脈沖信號被輸出并放大,然后進行數字信號處理,手持式塵埃粒子計數器通過與標準粒子信號進行比較,將對比結果用不同的參數表示出來。儀器的測量參數設定、測量結果顯示、按鍵、定時、打印、時間、日期、數據存儲等均由內置微機(MCU)控制和實現,手持式塵埃粒子計數器可同時顯示環境的溫濕度并監測報告激光粒子傳感器的工作狀態。該手持式塵埃粒子計數器按照國際通用標準設計(空氣采樣流量為2.83 升/分), 能同時對設定的兩個粒徑檔進行檢測,采樣時間可根據用戶需要任意設定,最長時間59分59秒。手持式塵埃粒子計數器采樣數據可儲存在內置的閃存內,該手持式塵埃粒子計數器在引進美國的技術上進一步創新, 具有測量精度高, 性能穩定, 功能強, 體積小, 操作簡單方便, 達到或超過了國際同類產品的性能指標。
手持式塵埃粒子計數器特性
• 200A型固定粒徑為:0.3μm ,可調粒徑為:0.5μm,0.7μm,1.0μm,2.0μm,3.0μm,5.0μm ,10.0μm;
測試范圍:10級~30萬級(對應ISO的4到9級);
• 重復性:相對標準偏差≤20%;
• 粒徑度:相對誤差≤35%;
• 光源:采用激光二極管作為傳感器的光源;
• 流量:2.83 升/分(0.1cfm)(誤差≤±5%);
• 最大采樣時間:59分59秒;
• 接口:串口(外置打印機接口);
• 自凈時間:≤20min ;
• 計數超限報警:10級~30萬級(對應ISO的4到9級);
• 手持式塵埃粒子計數器計數模式:累積計數模式、差分計數模式、濃度計數模式;
• 顯示:液晶128×64, 4行×8個(中文);
• 數據存儲:最大存儲量為999組數據;
• 手持式塵埃粒子計數器電源:Ni-MH電池(6.0V/3300mAH)或AC適配器(輸入:180~240V,輸出:9V/1000mA);
• 電池工作時間:連續測試時間約為8小時(Ni-MH電池);
• 外形尺寸:95(W)×180(H)×65(D)mm ;
• 手持式塵埃粒子計數器重量:約950g(含電池);
• 工作環境溫度:5~40℃相對濕度:≤75%;
• 標準附件:AC適配器、自凈過濾器、等動力采樣頭、手提箱;
• 手持式塵埃粒子計數器選件:三角架、打印機(含電纜)、外置溫濕度傳感器;
執行標準:
美國ASTM F649-01標準:“Standard Practice for Secondary Calibration of Airborne Particle Counter Using Comparison Procedures”
美國 ASTM F328-98 標準:“Standard Practice for Calibration of an Airborne Particle Counter Using Monodisperse Spherical Particles”
手持式塵埃粒子計數器功能:
• 日期和時間顯示
• COM內置串行打印機接口:接串口打印機
• 計數超限報警:儀器可設置4級(十級)、5級(百級)、6級(千級)、7級(萬級)、8級(十萬級)、9級(百級)六個級別的計數超限報警
• 數據存儲器,可存950組測量結果
• 全中文界面,操作簡單
• 外置傳感器能測量溫度、濕度并記錄存儲
手持式塵埃粒子計數器Brief Introduction
Airborne Particle Counter is an instrument used for the counting of particle amount and size distribution in clear environment. The main principle of the instrument is: after detecting laser of the laser sensor passed particles, the dispersed detecting laser is received by an optical sensitive component which will generate a pulse signal. The pulse signal is transmitted out and magnified. A conclusion can be made after the comparison between this signal and the pulse signal of standard particles. Through the MCU in the instrument, you can set parameters, print or store the results and time. The instrument can also report the humidity and temperature of the environment, as well as the working status of the laser sensor in the instrument. The design of the instrument follows the international standard (average Flow Rate of air sample is 2.83lpm). It can detect six kinds of particle size at the same time. Sample time can be set according to your request. The maximal sample time is 59min59sec. Sample data can be stored in built-in flash memory and transmitted out through a USB interface. The design of our Airborne Particle Counter is an innovation on American technology. The instrument has the features of high-accuracy, steady performance, strong function, small size, and being easy-to-use. Such features reached or surpassed that of other similar products in the international market
手持式塵埃粒子計數器Main Parameter
• Test particle size: fixed: 0.5μm;
• optional :0.3μm 、0.7μm、1.0μm、2.0μm、3.0μm 、5.0μm、10.0μm
• Test range: 10grade -0.3million grade
• Repeatability: relative standard deviation≤±10%
• Particle size accuracy: relative error≤±10%
• Light source: laser diode as the light source of the sensor
• Flow Rate: 2.83 l/min (0.1cfm) (error≤±5%)
• Maximal sample time: 59min59sec
• Self-purification time ≤10min
• Display: LCD128x64 pixels, 4line x 8 Chinese characters
• Interface: serial port (connect to external printer)
• Power supply: Ni-MH battery (6.0V/3300mAH)
• Battery working span: Successive testing time is approximately 8 hours (Ni-MH battery)
• Size: 95mm (W) × 180mm (H) × 65mm (D)
• Weight: 950g (with battery)
• Operating temperature: 5~45℃ ; Relative humidity ≤90%
• Storage temperature: -20~50℃ ; Relative humidity ≤90%
• Supplied accessories: AC adaptor, self-purifier, equal dynamic sampling probe, and suitcase
• Optional accessories: three-legged support, printer (with cable), or external temperature/humidity sensor
手持式塵埃粒子計數器Main functions:
1. Date and time display
2. COM internal serial printer interface: to connect with a printer
3. Over count alarm: six grades of over count alarm can be set up including 10grade, 100grade, 1000grade, 10000grade, 100000grade, 300000grade.
4. Data storage: 950 unites of data
5. External sensor for temperature & humidity measurement and data storage
6. Time-delay operation
7. Specially designed background light
Automatic power-off