as a general purpose dual-voltage isolation transformer for step-up (120 to 240 vac), step-down (240 to 120 vac), or straight 1:1 isolation (120 to 120 vac or 240 to 240 vac).
as a general purpose dual-voltage isolation transformer for step-up (120 to 240 vac), step-down (240 to 120 vac), or straight 1:1 isolation (120 to 120 vac or 240 to 240 vac).
this transformer is a general purpose dual-voltage "international" isolation transformer = for step-up (120 to 240 vac), step-down (240 to 120 vac), or straight 1:1 isolation
this transformer is a general purpose dual-voltage "international" isolation transformer = for step-up (120 to 240 vac), step-down (240 to 120 vac), or straight 1:1 isolation (120 to 120 vac or 240 to
instead of building a test rig with innumerable wires, and risking equipment damage or fire hazard, ed&d has designed and developed a cutting-edge line of resistive load banks.
rheostats are adjustable power resistors. perfect for low voltage applications (i.e. 5v, 12v, 24v). the low cost option for loading. another benefit is that they can be adjusted under load.
the needle flame burner diameter 0.5 mm is intended for conducting burning tests. it is constructed in strict compliance with iec standards (i.e. iec 65, 695-2-2, etc).
plastics are tested to determine their flammability burning characteristics (flame rating), their ignition potential do to thermal and electrical sources
the ed&d tirrill burner is designed to be used as an ignition source for small scale burning tests on plastic materials in compliance with the ul flame test requirements.
this ed&d exclusive product is intended for powering our hot wire ignition tester (model hwi-01). while conducting the hot wire ignition test, this product provides power for energizing the heater wir
the ed&d glow wire tester type gwt200 is designed to carry out fire hazard testing on electro-technical products in accordance with the provisions of international standards.
complies with various iec, en, ce, vde, ul & csa requirementsunit comes with nist traceable / iso 17025 accredited certificate of calibration.ed&d is iso 17025 accredited by ac
complies with ansi, csa, ul, iec, en, ce, and vde requirements. each of these devices is high-precision manufactured. unit comes with iso 17025 compliant nist-traceable certificate of calibration.
his ed&d exclusive system includes the water tank (492 liters/ 130 gallons), water pump, ball valve and unions, 100 psi pressure gauge, plumbing and hosing on a heavy duty hard plastic pallet.
for checking the protection against water to prove the degrees of protection with the second number x1. "protection against vertical dripping of water" and x2.
completely adjustable tube height system allows moving the tube up/down to quickly establish the maximum 200 mm spacing from the spray nozzles as specified in the standards.
this piece of equipment determine if accessible sharp points on toys are likely to cause injury. if the accessible sharp point penetrates a specified depth into the small rectangular opening of the te